Add to Cart
Red Color Hollow Back HDPE Plastic Indoor Stadium Bucket Seats
Blow molding Stadium Bucket Seats materials and performance:
1. Seat material: high-density polyethylene.
2. Auxiliary materials: anti-ultraviolet, flame retardant,
effective product performance.
3. Weather resistance: to ensure that it meets the requirements of
different environmental conditions for the weather resistance of
the seat, it will not deform or crack in 72 hours in a high
temperature environment of 80°C and 24 hours in a low temperature
environment of -20°C.
4. Executive standards: according to the relevant standards in the
light industry standard QB/T2601-2003 "Sports Stadium Public
Seats".
Specifications of Stadium Bucket Seats:
Style: integral seat, self-draining holes on the seat surface, no
water accumulation due to rain
Appearance: beautiful and generous, comfortable seating, reasonable
structure, strong strength
Raw material: HDPE
Production process: hollow blow molding
Production standard: in line with industry standards, the seat is
ergonomically designed to provide comfort and support, and it will
not feel tired after long-term use
The material is sturdy, durable, rust-free, water-free, easy to
clean
Fixing: According to the triangular stabilization principle, it
adopts three-point fixation, and the installation method is simple
and firm.
Seat color: the color can be selected according to the customer
Service life: The service life of the seat is not less than 10
years
Seat material
Main material of chair surface: HDPE (High Density Polyethylene)
Chair surface accessories: imported special seat additives
Seat support: steel plate stamped and formed, anti-static spray
treatment
Fasteners: ∮8 white expansion tube, ∮12 black expansion tube
pre-embedded, M6*14 large flat head screws, M6*50, M5*30
self-tapping screws for fastening
Site requirements
The concrete is solid, the step width meets 80cm, and the step
height meets 28cm-40cm (35cm high)
How to install blow molded seats:
1. The flat installation adopts the "several" shaped steel plate
connector, which has good mechanical properties and the surface is
electro-galvanized. The seat is fixed on the concrete steps with
special fasteners—M8X30 expansion nuts.
2. Side mounting and vertical mounting adopt high-strength
die-casting aluminum alloy bracket legs, which are light in weight
and high in strength. The seat is fixed on the concrete steps with
special fasteners—M8X80 expansion bolts.
3. Three installation methods: flat installation, side
installation, and vertical installation.
4. Connecting pipe
The use of galvanized steel pipes for transporting domestic water
can maintain the anti-rust ability in damp, exposed and other
environments.
Cold-formed Brackets for installation
1. It is made of 2.5mm thick high-quality carbon steel plate,
cold-rolled steel mold is hydraulically formed, beautiful
appearance, strong and firm, and the surface is electrostatic
sprayed.
2. The cold-rolled steel mold is hydraulically formed at one time.
3. The surface is electro-galvanized, which is durable and does not
rust.
Application of Stadium Bucket Seats:
Suitable for government conference rooms, schools, universities, colleges, hospitals, business hotels, theaters, theaters, courts, churches, cinemas, auditoriums, conference halls, concert halls, academic halls, lecture halls, amphitheaters, stadiums, arenas, etc.
The plastic chair surface must not contain soluble heavy metals. After the national furniture inspection center has tested the content of soluble heavy metals, heavy metals such as lead, cadmium, chromium and mercury shall not be detected.
The seat row number installation position is reserved at the upper end of each seat backrest, and the seat row number is riveted with aluminum alloy nameplate, which is firm and reliable. There are number plates on the brackets on both sides of the aisle to quickly guide the audience to check in.
Specifications | |
Product | Stadium Bucket Seats |
Material | HDPE:High Density Polyethylene with good weather resistance and aging performance |
Anti-UV ,flame retardant are optional | |
Mothod of production | Blow molding type or injection molding type |
Type | Bucket chair, foldable chair |
Color | Customised according to color chart |
Installation | Floor mounted, rise mounted,fixed by bolts and brackets |
Height | Flat back, Low back, Medium back, High back |
Plastic bleacher seat Dimension | 370W*400D*400H |
Packing | PP woven bag |
MOQ | 500PCS |
Delivery Time | 25-30 days according to the quantity |
Loading Capability | Around 1300PCS/20GP, 3300PCS/40HQ |
Application | Stadium, Arena,Track and Field court, Football stadium,Basketball stadium, Volleyball stadium, ect. |
FAQ
1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.
2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.
2.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.
4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen
5.What’s your payment terms?
TT transfer is preferred.
6.Do you have color choice?
Yes, we have multi colors for the clients.