Climatic Chamber Manufacturer Automatic Laboratory Machine Rain Test Chamber Simulation Chamber IEC 60529
Brand Name:BOTO
Certification:MIL STD GB JIS JEDEC IEC ISO
Model Number:B-LY
Minimum Order Quantity:1PCS
Delivery Time:15days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Supplier`s last login times:
within 41 hours
Product Details
Company Profile
Product Details
Climatic Chamber Manufacturer Automatic Laboratory Machine Rain Test Chamber Simulation Chamber IEC 60529
This rain test equipment is a non-standard equipment. The
artificial rain test chamber is used for external lighting and
signal devices and automobile lamp housing protection. It is a
necessary testing equipment in the fields of aerospace, automobile
and motorcycle, electrical engineering and electronics, home
appliances, scientific research and so on.
Safety protection system
1. Self-protection, three voltage phase loss, phase sequence
protection to prevent the pump from reversing. 2. Time accumulator
to prevent accidental interruption of the test and to know the
interruption time 3. Motor overload protection device 4. Equipment
overcurrent protection device 5. With fuse-free protection switch
6. When the temperature is over, the water level is low, the
machine warning light will indicate, and it will automatically
stop. When the fault is not eliminated, it cannot be turned on 7.
Water pressure overload protection switch 8. Pump overload
protection switch 9. The motor is equipped with an overcurrent
protector 10. Alarm buzzer 11. Chinese indication screen of failure
point
Power supply and environmental requirements
1. Power supply: 380V 3-phase 4-wire 50Hz 2. The ambient
temperature around the machine is maintained at +5~+35℃. 3. There
must be a water source (ordinary tap water) and a drainage pipe.
Scope of application
This full product meets GB 2423.38-90 "Basic Environmental Test
Regulations for Electrical and Electronic Products Test R: Water
Test Method", GB/T10485-2007, strictly in accordance with the
low-voltage electrical enclosure protection IPX3...IPX4... level
GB/T4942.2 -93, GB 4208-93, GB 4706, GB 7000 and other
corresponding national standards and technical parameters design
and manufacture of other related standards. Can carry out the water
test specified by the corresponding standard
Waterproofing test class:
There are waterproof testing requirements for portable, outdoor and automotive electronics. IEC, MIL, ETSI and SAE have formulated corresponding testing requirements internationally.
Rain test box is mainly used in electronic, electrical, aerospace, military and other scientific research units of external lighting, signal devices and car lamp shell protection test.
IEC/EN60529 Waterproofing is divided into 9 classes (Class 0 to Class 8), waterproofing classes (e.g. IPX4- Waterproofing class 4) :
Level 0: completely waterproofing without protection
Level 1: Vertical dripping should have no harmful effect
Level 2: When each vertical plane of the case is tilted within the range of 15°, the vertical dripping shall have no harmful effect
Level 3: Water is sprayed within 60° of each vertical plane, without harmful effects
Level 4: Splashing the shell in all directions has no harmful effect
Level 5: Spraying water in all directions to the enclosure has no harmful effect
Meeting Standards:
IEC 60529
Features of EN/ UL Rain test chambers:
- Rotating rain and spray nozzles designed to JIS specifications
- Speed control for the rotating spray nozzles
- Stationary product shelf - A rotating shelf is optional: see options
- Water pressure regulators, gauges and flow meters
- Special high-volume floor drain system to rapidly drain water out of the chamber
- Interior chamber size is the smallest possible area using the JIS specified nozzles
Other sizes and capabilities available upon request. Please contact us with your application.
Model:
| Model | B-LY | ||
Internal Dim(mm) | custom | ||
| SOT(mm) | undetermined | ||
| structural features | Radius of arc pendulum tube | 400mm | |
| Right Angle pendulum tube length | 500mm | ||
| Water jet pressure | 50-400kpa | ||
| Right Angle swing pipe spray diameter | 16mm | ||
| Water tank material | High-grade stainless steel plate | ||
Packing/Shipping:
Climatic Chamber Manufacturer Automatic Laboratory Machine Rain Test Chamber Simulation Chamber IEC 60529
Inquiry Cart
0