Cyclic Corrosion Testing
Brand Name:BOTO
Certification:CE ISO
Model Number:BT-RT-311A
Minimum Order Quantity:1set
Delivery Time:5-25 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Supplier`s last login times:
within 41 hours
Product Details
Company Profile
Product Details
Salt Spray Test Machine, Salt Spray Test Equipment, Salt Spray Test Chamber
Product description
This chamber is mainly used for Salt spray test (NSS,ACSS), Anti-corrosion test (CASS) and so on.
Product Parameters
Corresponding Standard :
1. GB/T 2423.17-1993 salt spray test
2. GB/T 2423.18-2000 salt spray test
3. GB/T 10125-1997 salt spray test
4. ASTM.B117-97 salt spray test
5. JIS H8502 salt spray test
6. IEC68-2-11 salt spray test
7. IEC68-2-52 1996 salt spray test
8. GB.10587-89 salt spray test
9. CNS.4158 salt spray test
10. CNS.4159 CASS Accelerated acetic acid copper salt spray test
11. GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test
Product Advantages
1. Spray method: A: continuous spray B: programmable spray.
2. Adopt a full detection system, which can be lighted when a fault
occurs.
3. The whole set is made of imported PVC board, the structure is
strong, never deformed, and it is resistant to acid and alkali and high temperature and never
aging.
4. Adopt automatic/manual water adding system, with the function of
automatic/manual water adding when the water level is insufficient, the test will not be
interrupted, and the water level will be alarmed when the water level is insufficient.
5. Quartz glass nozzle, the mist diffuses evenly, and falls naturally
on the test piece without blocking by crystalline salt.
6. The controllers are all on the same board, easy to operate and
clear at a glance.
7. With double over-temperature protection, warning of insufficient
water level to ensure safe use.
8. The imported temperature controller has manual and fully automatic
control methods, using digital display, PID control, error ± 0.1 ℃, the maximum setting
time can reach 999HrS.
9. The laboratory adopts direct steam heating method, the heating
speed is fast and uniform, and the standby time is shortened.
10. The spray tower is equipped with a conical diffuser, which has the
functions of guiding the mist, adjusting the amount of mist and evenly falling the mist.
11. The pressure barrel adopts Henry's law to heat and humidify.
12. The upper cover of the test tank is automatically opened and closed
by a pneumatic cylinder, which is easy to operate and has good safety.
13. After the test is completed, it has an automatic defogging device
to clearly observe the test products in the test room.
Why Choose Us
Cyclic Corrosion Testing
Inquiry Cart
0