Constant Temperature And Humidity Test Equipment Lab Climatic Control Test Chamber
Brand Name:BOTO
Certification:CE certificate
Model Number:B-TH-225
Minimum Order Quantity:1 Set
Delivery Time:5-15 days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Supplier`s last login times:
within 41 hours
Product Details
Company Profile
Product Details
Product Description
Constant Stability Test Chamber Climate Environmental Test Chamber
Laboratory Programmable Temperature Humidity Test Chamber of
commerce
Product description
Test accuracy:
1,GB2423.1-2008/IEC6008-2-1-2007
2,GB/T 2423.2-2008
3,GJB150.3A-2009
4,GJB150.4A-2009
5,GB2423.22-2008
6,GBT 2424.5-2006
7,GB/T 10589-2008
8,GB/T2423.3-2008(IEC68-2-3)
Specification:
1. The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2. Available in Chinese and English LCD touch screen, easy operation and program.
3. Programmable temperature humidity test chamber is able to display the relative date and information of the whole operating system in running mode, graphic display. Precautions, maintenance and troubleshooting appear on the screen instantly.
4. The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5. The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6. Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Technical parameters
System instruction
BOTO has strong confidence to serve oversea agents, welcome to visit our company and factory if any interest.
Test chamber Key cooperation markets: Canada, Singapore, Philippines, UNITED Arab Emirates
COMPANY INFORMATION
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
Production Process
Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
Certification
The certificate is valid until June 17, 2024
Cooperative partners
BOTO ADVANTAGE
OUR TEAM
Our Services
During the whole business process, we offer Consultative Selling service.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
PACKAGING AND SHIPPING
Product description
Constant temperature and humidity test chamber is also called
constant temperature humidity test machine, temperature and
humidity chamber, programmable damp and heat alternating test box,
constant temperature machine or constant temperature and humidity
box. It is used to test the performance of materials in various
environments. This kind of material has heat resistance, cold resistance, dry
resistance and humidity resistance. It is suitable for testing the quality of products such as
electronics, electrical appliances, mobile phones, communications,
meters, vehicles, plastic products, metals, food, chemicals,
building materials, medical care, aerospace, etc.
Test accuracy:
1,GB2423.1-2008/IEC6008-2-1-2007
2,GB/T 2423.2-2008
3,GJB150.3A-2009
4,GJB150.4A-2009
5,GB2423.22-2008
6,GBT 2424.5-2006
7,GB/T 10589-2008
8,GB/T2423.3-2008(IEC68-2-3)
Specification:
1. The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2. Available in Chinese and English LCD touch screen, easy operation and program.
3. Programmable temperature humidity test chamber is able to display the relative date and information of the whole operating system in running mode, graphic display. Precautions, maintenance and troubleshooting appear on the screen instantly.
4. The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5. The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6. Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Technical parameters
| Model | BT-280 | BT-2150 | BT-2225 | BT-2408 | BT-2800 | |
| Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | |
| Outside Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 | |
| Volume (V) | 80 L | 150L | 225L | 408L | 800L | |
| Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% | |||||
| Function | Fluctuation | ±0.5°C ±2.5%RH | ||||
| Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) | |||||
| Controller Analytical Accuracy | ±0.3°C ±2.5%RH | |||||
| Wind Cycling Way | Centrifugal fan-broadband type forced air circulation | |||||
| Refrigeration Way | Single stage compression refrigeration | |||||
| Refrigerator | French Tecumseh | |||||
| Refrigerants | R4O4A USA DuPont environmental protection refrigerant(R23+R404) | |||||
| Condensing Way | Air-cooled or water-cooled | |||||
| Water Supplying Way | Automatic cycling water supply | |||||
| Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system | |||||
System instruction
| Control System | |
| Screen display function | 1. Temperature and humidity setting (SV) actual (PV) value is
displayed directly 2. Can display the execution program number, segment, remaining time and cycle number, running time display 3. Program editing and graphic curve display 4. With a separate program editing screen, each page can enter 4 segments of temperature and humidity, time 5. Fixed point or program action status display 6. Language conversion can switch Chinese / English 7.7 inch true color display screen |
| Program capacity and control function | 1. Program quantity that can be used: maximum 120 groups, 1 program
can be composed of 1 ~ 99 stages, capacity: 1200 stages 2. Commands can be executed repeatedly: each command can be up to 999 times, the temperature and humidity slope can be set by the time axis; 3. The program can be set to connect to use; the production of the program is easy to use conversational operation; with editing, Clear, insert and other functions; group time signal output control (can control the ON / OFF action of the test object) 4. With 9 groups of PID parameter settings 5. With skipping and holding functions during program execution 6. With power-off program memory, it can automatically start and resume the program after power is restored 7. Data acquisition, export, view graphics function 8. PID automatic calculation and FUZZY control function 9. The screen can be adjusted for backlight, and the backlight time can be set 10. On-screen display protection function can be set to close regularly or manually 11. Program copy, COPY, connection function, edit experiment title and other program editing functions 12. With appointment start and shutdown function 13. With date and time adjustment function 14. Button and screen lock (LOCK) function 15. Standby picture viewing function and exception handling picture explanation function |
| Communication interface | 1.R232 / 485 communication 2. Can display curves and obtain data 3. Can be used as a monitoring and remote control system |
| Setting method | Chinese / English interface, touch input |
| Operation mode | Program method / fixed value method |
| Predetermined area | Maximum temperature range: 5 ºC |
| Display resolution | Temperature:0.01ºC;Time:0.1min |
| Power off memory function | Can set power failure recovery mode as: hot start / cold start / stop |
| Input | Platinum resistance |
| Storage function | Standard configuration 2G SD card to record test data curve, can upload and download data, expand storage capacity |
BOTO has strong confidence to serve oversea agents, welcome to visit our company and factory if any interest.
Test chamber Key cooperation markets: Canada, Singapore, Philippines, UNITED Arab Emirates
COMPANY INFORMATION
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
Production Process
Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
Certification
The certificate is valid until June 17, 2024
Cooperative partners
BOTO ADVANTAGE
OUR TEAM
Our Services
During the whole business process, we offer Consultative Selling service.
- Customer inquiry process:
- Specifications customize process:
- Production and delivery process:
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
- Installation and after sale service:
PACKAGING AND SHIPPING
Constant Temperature And Humidity Test Equipment Lab Climatic Control Test Chamber
Inquiry Cart
0