Religious Custom Marble Sculpture Large Marble Buddha Statue

Large marble Buddha statue can be customized to map a variety of marble sculpture

Description of Art Sculptures

Daily maintenance
1-2 times a week the stone care machine with nano wool pad (100 clean pad) (if there is a 300-400 high-speed machine is better) in the clean or has been washed on the ground spray a small amount of crystal surface maintenance agent or crystal hard powder (crystal hard powder to add water, water according to the humidity, the water should be more dry weather). 1-2 grams per square meter.
Use a stone care machine to coat well, and then grind until bright. Finally, the dust on the ground is pushed clean. Should be piecewise spray grinding, each section 1-2 square meters. Clean pad should be kept clean, when stained with too much powder will affect the effect; If found stained with dirt should be used on the other side, until both sides are stained with a new one. Depending on the working area, bring enough cleaning pads. Wash and dry soiled ones before use.
In the smooth dark ground, the cleaning pad can be changed to steel silk wool pad, the effect is better, but it should be noted that the ground is not smooth, or steel silk wool pad stained will make the ground black.
Matters needing attention
1. The stone surface should be dry and smooth. After renovation, use animal hair pad or nano wool pad as far as possible to dry the ground temperature to about 50 degrees before crystal surface treatment.
2. Use clean steel wool and cleaning pad.
3. As soon as it is good, the stone should stop immediately when the glass is bright.
4. It is best to use neutral crystal surface agent, neutral refurbished slurry.
Stone daily maintenance type crystal hard treatment: this is the best maintenance way, as long as the conditions can be done, should try to use this way.
Tools and materials: stone care machine (brush machine), red Baijie pad, spray can, dust push, crystal surface maintenance agent, crystal hard powder.

Specification of Art Sculptures

1.High-quality materials

No Matter we use stainless steel plate or stainless steel tubes,We can see the thickness and the surface effect, all use the special exported standrard raw material, generally have 304 stainless steel and 316L stainless steel for your choose, the thickness can be 2-3.5mm.

Our raw materials come from government-operated stainless steel factories, and we have test certification for each batch of materials. We only use 304 or 316 to make stainless steel sculptures. However, other businesses use 201 stainless steel for low prices.

Resin sculpture production process

Fiberglass sculpture is a finished type of sculpture. Fiberglass sculpture has the characteristics of light weight, corrosion resistance and relatively low cost. FRP, also known as FRP, is known as fiber reinforced plastic. It is a composite material composed of synthetic resin as matrix material and glass fiber and its products as reinforcement material.

Production Flow

1. Showing the details drawing/ 3D mold for clients to confirm.

2. Making exact structures according to drawing/ client's photos/ 3D mold.

3. Cover the stainless steel plate on existing structures.

4. Welding and polishing the surface.

5. Stand up and take all different views pictures/ videos, show to clients.

6. Packing into iron box after clients are satisfied with sculptures.

Guangzhou Shituo sculpture Co., Ltd.,was established in 2013, registered capital million yuan.

This company specialized production stainless steel, copper, glass fiber reinforced plastic materials such as the botanical garden sculpture, city sculpture, square, indoor and outdoor decoration and sculpture, metal gifts, all kinds of cartoon game characters, etc.

Company based on integrity, "focus on quality, attentive service" as the core value, all customer demand as the center, is committed to creating market competitiveness of high-end products, to create more detailed, better service.