Mining Processing Vacuum Permanent Magnet Filter Filtrating Equipment

Mining Processing Vacuum Permanent Magnet Filter Filtrating Equipment

Introduction

Vacuum Permanent Magnet Filter is a top-feeding, drum-like, outside-filtering vacuum permanent-magnetic filter. It is suitable for dewatering of coarse and strong-magnetic particles. Inside the drum is a strontium ferrite permanent-magnetic, which enables the magnetic particles to be absorbed on the filter cloth quickly.

This equipment is mainly for dewatering of ore pulp containing coarse and strong magnetic particles. Because of the top feeding design, particles are obviously stratified in the filter cake according to their grain sizes. When the magnetic concentrate is shaped into filter cakes, the coarse particles move faster than the fine particles toward the filter cloth under the effect of gravity and magnetic force.

The coarse particles touch the filter cloth first, makes the filter cake breathable. When attracted by the magnetic force, the magnetic particles in the ore pulp are laid out on the surface of the drum radially and giving rise to magnetic stirring because of magnetic pole variation.

All these features create a favorable environment for filter cake dewatering; filter cakes produced in this way are usually thick and have good breath ability, and are improved productivity which is three times more than that of other drum vacuum filters of the same specifications.

USE

This kind of filter is an outside vacuum permanent magnetic filter with drum-like-surface at the up fillings entrance part.lt can be mainly applied to dehydration of ferromagnetic materials with comparatively rough grain.

PRINCIPLE

Filters rely primarily on the action of an open magnet system rowed by permanent magnets inside the cylinder to form a filter cake. When the magnetic materials are put into the feeding box, the solid particles of the magnetic materials will be quickly absorbed by the cylinder filter as a magnetic cluster, because of the magnetic effects and their own gravity (At the moment, the amount of compressed air can be used to blast to remove the mineral particles on the filter cake to layer through grain). For the upper material, the effect of stratifying the mineral under the filter cake is more noticeable due to granularity, thick structure with large permeability together with the driving cylinder enter the dewatering zone. On the effect of vacuum, the residual water under the filter cake through the filter, then pass the screen room, and the two heads of the vacuum tube distribution line are singled out. Materials that have become dehydrated are blown off by the compressed air in the unloading zone. Filter access to clean area after discharge. Jet and water are used for cleaning. Forced by the compressed air, the water was blown out of the cylinder, resulting in a better cleaning process. Avoid the filter pore from clogging and prepare good conditions for the next drying of the materials.

Technical Specifications and Performance

Company Inroduction

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

FAQ to save your precious time!

Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

​►Our company was founded in 1971 and has a history of more than 40 years. Rich experience and strong strength are the primary guarantee for equipment quality and after-sales service.

►We are located in the triangle of Beijing, Tianjin and Tang, with superior geographical location and convenient transportation. It is 180 kilometers away from Tianjin Port (3 hours by car) and can guarantee timely delivery.

►Choose excellent raw materials. The steel materials are selected from well-known domestic manufacturers as suppliers to fully guarantee the chemical composition of the raw materials and the mechanical properties of the equipment.

►Strict product testing. Welding is submerged arc welding, and each weld is inspected by a flaw detector (ultrasonic

flaw detection). After passing the test, it will continue to the next process.

►After each equipment is completed, it will be installed and run in the factory to ensure stable operation of the equipment before it is loaded and shipped.
After heat treatment, the casting spare parts are machined in our factory for processing. After processing, the quality inspection department will conduct quality inspection and flaw detection.

Q1: Hi, are you a mining machinery manufacturer?

Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?

Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.