EMC Chamber Rf Ferrite Tile Absorber 6.7mm 5.2mm Height

6.7mm 5.2mm height ferrite tile for EMC chamber​

• Typicaly Performance at:
  • 30 MHz = -18.0 dB
  • 100 MHz = -27.0dB
  • 300 MHz = -25.0 dB
  • 500 MHz = -19.5 dB
  • 1000 MHz = -12.5 dB
• Initial permeability: 2000±20%
• Relative Loss: 25 (0.1MHz) tanδ/μiac
• Saturation Flux Density: 260 (1194A/m)
• 3.93" by 3.93" (.0265" thick)
• Minimum Order Requirements Apply

Ferrite Tile Size

· Base size: 100*100mm

· Standard height: 5.2mm, 6.7mm

· Diameter of bore: 10mm

Ferrite Tile Application

· Used for EMC chamber

Based on the principle of having complex magnetic permeability equal (or nearly equal) to complex dielectric constant. Materials with this property exhibit an impedance equal to that of "free space" and therefore do not reflect radiated energy at normal incidence. Ferrite Tile can provide 10dB - 25dB of absorption between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches), but can be heavy (roughly 10 lbs per square foot).

Size for EMC chamber ferrite tile

· Base size: 100*100mm

· Standard height: 5.5mm, 6.7mm

· Diameter of bore: 10mm

Application for EMC chamber ferrite tile Used for EMC chamber

About US

• Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.
• Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.
• Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc
• Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application
• Our advantage: high quality/high cost-effective/short lead time
• Our service: all products have two years guarantee
• Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc

We are a professional and famous EMI filter manufacturer.

Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.

Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.

Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc

Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application

Our advantage: high quality/high cost-effective/short lead time

Our service: all products have two years guarantee

Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc