Name: 120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd
Brand: nenglv
Price: 150.00 USD

China Categories

Home Products Suppliers Selling leads

English

Home /Products /Electrical Equipment & Supplies /Power Supplies /Switching Power Supply /

120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd

Brand Name:nenglv

Certification:ce

Model Number:HZ-16C-G

Minimum Order Quantity:>=1 Pieces

Place of Origin:China

Supply Ability:100 Piece/Pieces per Week

Contact Now

Add to Cart

Changzhou Haozhuo Electronic Co., Ltd.

Verified Supplier

Location: Changzhou China

Address: NO.5 NORTH WUQING ROAD,CHANGZHOU,JISNGSU

Supplier`s last login times: within 37 hours

View Contact Details

Product Details Company Profile

Product Details

250VAC 16A emi earth line filter rf shielding

Tips Related to EMI Filter Current Ratings
To determine the current rating requirements for a filter, consider the maximum current rating specifications for the system to which it is connected. This is the maximum root mean square (RMS) amperes or horsepower rating of the load that will be connected to the filter. If there is a breaker present, the filter must always be rated to meet or exceed the breaker rating.

You can connect some types of filters in parallel to achieve higher current ratings. For this approach to work, you need to use identical filter models, and the connection must allow the filters to share the current equally. Be sure to follow the National Electric Code (NEC) and all local electrical codes throughout the process.

Product Description

RATED VOLTAGE	250 VAC
RATED CURRENT	30 A
OPERATIONAL FREQUENCY	50 60 Hz
Voltage Drop	Less than 1V
Overload	140% of rated current for 15 minutes
Harmonic Distortion	Less than 2% @ full rated current
Leakage Current	≤0.2A@380/230VAC and 50Hz
Dielectric Withstanding Voltage	1000VDC (line to line) 1000VDC (line to case)
DC Insulation Resistance	As Per MIL-STD-202 Method 202
Terminal Strength	As Per MIL-STD-202 Method 211
Temperature Rise	As Per MIL-F-15733
Insertion Loss	≥100dB@14K-40GHz As Per MIL-STD-220A, Under Load Condition
Climatic Classification	25/070/21

Aim to keep power and control wiring separated. Ensure that power and control wires do not run parallel. If cables must cross, ensure that cables cross at or as close to a right angle as possible.
Route the conductors as close to the panel as you can.
Ensure that the filter input and output conductors are separated.
Keep input and output leads separated.
Use shielded wiring if necessary, especially, on the side that needs to be protected from the radiated noise.

Ensure that the shield of shielded cables is terminated at both ends.