40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
Brand Name:YT
Certification:ISO, SGS, ROHS
Model Number:YT-FE2110A-25
Minimum Order Quantity:10 pcs
Delivery Time:3-7days
Payment Terms:XTransfer T/T, Western Union, PayPal
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Fl 4, Bldg 41, Shahe Industrial District, Baishizhou, Nanshan, Shenzhen, Guangdong, China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
QSFP 40G SR4 Fiber Optic Module , Sfp Transceiver Multimode 100M
MPO 850nm
Description
40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.
An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.
Parameter
| Package (Form Factor) | QSFP+ |
| Data Rate (typical) | 10.3 Gbps/CH |
| Centre Wavelength | 850nm |
| Distance | 100m on OM3 MMF |
| Diagnostics | Digital Monitor |
| Transmitter | 4CH VCSEL Array Laser |
| Receiver | 4CH PIN photo detector Array |
| TX Output Power (dBm) | -7.5~+2.5 |
| RX Sensitivity (dBm) | -9.5 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | MTP/MPO 8F MMF Without PI |
Features
- 4 channels full-duplex transceiver modules
- Transmission data rate up to 10.5Gbps per channel
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- Low power consumption <1.5W
- Hot Pluggable QSFP form factor
- Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
- Single MPO connector receptacle
- Built-in digital diagnostic functions
- Operating case temperature 0°C to +70°C
- 3.3V power supply voltage
- RoHS 6 compliant(lead free)
Specification
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Transmitter | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | 1 | |
| RMS Spectral Width | λrms | 3.5 | nm | 1 | |||
| Average Launch Power, each lane | PAVG | -5.5 | -0.5 | +2.3 | dBm | ||
| Optical Modulation Amplitude (OMA) | POMA | -4.5 | -0.5 | +3.5 | dBm | 1 | |
| Difference in Launch Power between any two lanes | Ptx,diff | 5.0 | dB | ||||
| Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | OMA-TDP | -9.7 | dBm | 1 | |||
| Rise/Fall Time | Tr/Tf | 50 | ps | ||||
| Extinction Ratio | ER | 3.5 | dB | ||||
| Relative Intensity Noise | Rin | -128 | dB/Hz | ||||
| Optical Return Loss Tolerance | TOL | 12 | dB | ||||
| Transmitter Reflectance | RT | -12 | dB | ||||
| Transmitter Eye Mask Margin | EMM | 10 | % | 2 | |||
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | ||||||
| Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | ||||
| Receiver | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | ||
| Damage Threshold | THd | +3 | dBm | ||||
| Overload, each lane | OVL | +1 | dBm | ||||
| Receiver Sensitivity in OMA, each Lane | SEN | -12.5 | dBm | ||||
| Difference in Receive Power between any two Lanes (OMA) | Prx,diff | 5.0 | dB | ||||
| Signal Loss Assert Threshold | LOSA | -30 | dBm | ||||
| Signal Loss Deassert Threshold | LOSD | -15 | dBm | ||||
| LOS Hysteresis | LOSH | 0.5 | 6 | dB | |||
| Optical Return Loss | ORL | -12 | dBm | ||||
| Receive Electrical 3 dB upper CutoffFrequency, each Lane | Fc | 12 | GHz | ||||
Notes:
1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.
2. The eye diagram is tested with 1000 waveform.
FAQ
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping are also optional.
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
Inquiry Cart
0