Huawei H801SPUB MPLS Service Processing Unit Board

H801SPUB Board

The H801SPUB board is a MPLS service processing unit board.

Feature and Specifications

10 Gbit/s MPLS switching capability

Unidirectional 10 Gbit/s, bidirectional 5 Gbit/s when only one control board (SCUx) is working

Bidirectional 10 Gbit/s when two control boards (SCUx) are working in load sharing mode (V800R011C00 and later versions)

Active/standby switchover of the control boards

Board power-off in case of a high temperature

Temperature query and high-temperature alarm

NOTE:

Only two SPUB boards can be installed in the system at the same time. And if two SPUB boards are in use, both of them must be located side by side in the shelf.

Parameters

Power Consumption and Maximum Frame Size of Boards

You can query power consumption, maximum frame size, and normal operating temperature of all boards.

lists the power consumption and maximum frame size of boards. "-" indicates N/A.

The operating temperature of all the boards is -40°C to +65°C. The lowest board startup temperature is -25°C.

NOTE:

The power consumption of the board is tested in the following conditions:

Working voltage: -53.5 V DC.

Ambient temperature: 25 °C.

Static power consumption: All ports do not carry any loads. Specifically, users under POTS ports hang up phones, xDSL ports are deactivated, and optical modules are not installed on optical ports

Maximum power consumption: All ports fully carry loads. However, only 25% users under POTS ports concurrently pick up phones and the feeding current is 20 mA.

The board power consumption slightly varies with the power module configured for the board and discreteness of components.

Table 1 Power consumption and maximum frame size of boards

Working Principle

Figure 1 Working principle of the H801SPUB board

The basic working principle of the H801SPUB board is as follows:

The control module loads the board software, controls the running of the board, and manages the entire board.

The service processing module processes the MPLS packets and the service data packets, and forwards the service data packets.

The power module draws -48 V power from the backplane and converts the power into working power for each functional module of the board.

The clock module provides clock signals for each functional module of the board.

Front Panel Port

Indicator

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed ZTE product: 1 Year

The Support Contacts:

If your ZTE products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.

Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.