Add to Cart
Single Phase Smart Energy Meter with load remotely
General Introduction
1) Single Phase Smart Energy Meter with load remotely can be controlled to disconnect and reconnect the load remotely,
which conforms to DLMS/COSEM.
2) It can measure the import and the export active energy, and is with
TOU and step function, and can be with PLC or RF module for
communication,
3) Remote disconnection and reconnection of the meter.
Main functions
1. Display and indication: It is with the wide viewing angle LCD
for displaying, which has backlight and can display the status
indication and the hint characters. The displayed contents can be
switched via push button, and the displayed items can be configured
via communication. It is with one kWh impulse isolation output, one
LED for kWh impulse; one LED for relay ON/OFF, and one LED for
alarm.
2. Measurement: It can measure the import active and the export
active energy and the total active energy. The total active energy
can be selectively combined by the import and the export active
energy.
3. Alarm: The meter will alarm when the meter cover is opened or
the tamper event is happened.
4. TOU:4 tariffs; Built-in 2 sets of time zone tables and 2 sets of
daily period tables, which can be set as per the requirements.
Moreover, the switching time for both 2 sets of time zone tables
and 2 sets of daily period tables can be set, and the main and
backup switching can be configured. It can be set 8 time intervals
within 24 hours, and 100 holidays.
5. Measurements: It measures various parameters, such as voltage.
current(neutral optional), active power, power factor, etc.
6. Event logs: It records the status of meter and the timestamp of
events, such as programming, opening of meter cover, power outage,
time correction, disconnection/reconnection, etc.
7. Communication interface: Independent RS485/RS232, PLC/RF,
Optical port.
8. Load profile: at least for 40 days with the time interval of 15
minutes.
9. Billing: It can be set 20 billing points per month. It can
maximally record latest 12 times' billing historical data including
import and export active energy of each tariff.
10. Meter reading at power outage: Meter registers can be read via
button or optical port.
11. Communication interface: The meter has one infrared interface,
one RS-485 and one PLC or RF interface. Interfaces are independent.
The protocol of meter conforms to DLMS/COSEM.
Technical specifications
Items | contents |
Techniacl Standards | IEC62052-11; IEC62053-21; IEC62053-23 |
Protocol | IEC62056-21;IEC62056-42;IEC62056-46;IEC62056-53;IEC62056-61;IEC62056-62 |
Accuracy | Active: Class 1 |
Reference voltage | 120V/220V/230V/240V |
Current | 5(60)A,5(100)A |
Reference frequency | 50 / 60Hz |
Power consumption | <1.5W,6VA |
Operation voltage range | 0.8Un~1.2Un |
Limited operation voltage range | 0.7Un~1.3Un |
Operation temperature | -25℃~ +60℃ |
Limited operation temperature range | -40℃~ +70℃ |
RTC deviation | ≤0.5s/d |
Life time | 15 years |
Size | 223mm(L)×112mm(W)×71mm(H) |
Net weight | About 0.9kg |
Q & A
Q: What are the main advanced features of smart energy meter?
A: (1) Appearance and structure unification: The type specification
promulgated by State Grid Company makes specific requirements on
smart energy meters' dimension and layout, and even the LCD display
interface, which is convenient for detection, installation and
maintenance.
(2) Application function extension: Except traditional metering
function, smart energy meter also carries out application extension
on various functions, such as energy day freezing, historical
energy data query, exception management, etc.
(3) Communication protocol concretion: Via DLT/645-2007 The
communication protocol of multifunction energy meter and its
filling documents, it makes an elaboration on message formation,
field definition, etc., which can ensure the compatibility among
energy meters produced by different manufacturers.
(4) Interface display diversity: On the LCD display of local IC
card prepaid energy meter, in addition to seeing users' this month
power consumption, it can also display various information
including current tariff, by which users can judge current power
consumption status.
(5) Information exchange securitization: Compared with traditional
energy meters, smart energy meters all have ESAM module, which
carriers out encryption authentication to important information
such as power purchase, control, etc.
Honorary Qualification
Basing on technology, quality, marketing and other comprehensive
advantages, Risesun devotes to creating its own brand, and has won
many honorary titles, including China Famous Trademark, National
High-tech Enterprise, Provincial Enterprise Technology Center of
Zhejiang Province, Zhejiang Province Famous Company, Zhejiang
Famous Brand Products, AAA Level Enterprise to Keep Contract and
Credit, AAA Class Tax Paying Enterprise, and successive Top 100
Good Credit and AAA Enterprise of banking system. With its brand
and other comprehensive advantages, Risesun has been elected as the
director unit of China Instrument and Meter Industry Association,
and the member unit of the national standard revision group of
National Standards Technical Committee for Electrical Measuring
Instruments.
Moreover, a variety of leading products have passed quality
certifications of the international authoritative organizations
like the Holland KEMA, the European Union CE-MID, South Africa STS,
Switzerland DLMS and etc. Risesun pays attention to technological
innovation, and has already built solid product quality security
system by means of scientific management.
Each of honors accompanies each step of the growth of Risesun, but Risesun's people have always believed that honor only belongs to yesterday, and does not represent today and tomorrow, and all that we have now is to give us a reason to climb higher. For better tomorrow, Risesun's people work hard as always.