S11 10KV 0.4KV 1600KVA Oil Immersed Power Transformer

S11/S13/14-M Oil-Immersed Transformer 10KV/0.4KV 30-1600KVA 50Hz

Product Introduction

10KV-S11 Oil Transformer main technical data

10KV-S13/14 Oil Transformer main technical data

Product Standards

GB1094.1-2013 General rules for power transformers
GB1094.2-2013 Power Transformer Temperature Rise
GB1094.3-2003 Insulation Level and Insulation Test of Power Transformers
GB1094.5-2008 Power transformer withstands short circuit capability
GB/T1094.10-2003 Power transformers - Part 10: Determination of sound levels
GB/T25446-2010 Oil-immersed amorphous alloy core distribution transformer technical parameters and requirements

Conditions

1. Conditions of the normal environment: The altitude does not exceed 1000m;
2. The highest ambient temperature +40 °C, the lowest -25 °C;
3. Conditions for special environments: Altitude over 1000m;
4. The highest ambient temperature +40 °C, the lowest -45 °C. (Detailed description when ordering);
5. Installation site: no corrosive gas, no obvious dirt environment;
Note: According to the agreed conditions, to provide users with products under special conditions of use.

Structural Features

Iron core: The magnetic material of iron core uses amorphous alloy. Since the amorphous alloy does not have a crystal structure and has a soft magnetic characteristic, the area of ​​the hysteresis loop is very narrow, the magnetization
power is small, the electrical resistivity is high, and the eddy current loss is small, so the no-load loss and no-load current of the transformer made of this material are used. very low. The core is composed of four separate core frames in the same plane
to form a three-phase five-column type. It must be annealed, and it must have a cross-barrier joint with a rectangular cross-sectional shape.

Coil: In addition to using low-voltage windings (160kVA or less) with copper conductors, a cylindrical structure made of copper foil is generally used; high-voltage windings use a multi-layered cylindrical structure to balance the winding ampere distribution and magnetic flux leakage. High-voltage and low-voltage windings are wound together with wire tension devices to form rectangular coils, and the coils are solidified by hot-pressing and shaping to enhance the mechanical strength of the windings and the ability to withstand short circuit.

Oil tank: It adopts a beautiful full-sealing and maintenance-free corrugated structure. Through advanced oil tank production technology,it undergoes strict pressure...

Knkong Electric Co., Ltd (Zhengzhou Knkong Mechanical And Electrical Co., Ltd)was established in 2012. A wholly-owned subsidiary of Henan Sanhe Electric Group. We are mainly responsible for overseas market exporting, electronic components, and technology import.

Relying on a high-quality technical R&D team and continuous updating of product structure, the company's products have been classified into 10 categories, 30 varieties and more than 100 kinds of specifications from 35kV to low-voltage terminal electrical products. Product coverage: power transformers, indoor (outdoor) High-voltage vacuum circuit breakers, high and low voltage switchgear, integrated distribution boxes, energy metering boxes, power distribution terminals (DTU, FTU), fault indicators, cable branch boxes, smart power distribution systems, power automation equipment, and instrumentation. The company has first-class production equipment, advanced manufacturing technology, a strict production quality management system, sophisticated testing equipment and a perfect after-sales service system. A strong product application and technical support team can provide customers with the most comprehensive and secure product application and technical support.