FSP300-60ATV PF Switching Power Supply 150W - 250W Industrial Computer Power Supply

Power Supply FSP300-60ATV(PF) switching power supply FSP300-60PLN Industrial Computer Power Supply

Product SKU:FSP17976_Se
Condition:Brand New
Current:115/230V~,10/5A,60/50Hz
Voltage:300W(+3.3V & +5V=200W MAX)
Power:300W
Supports Pentium processors from Intel and Athlon from AMD
passive PFC at 300 watts ATX
80 mm fan, without temperature control
20 + 4 pin plug
Power switch for on and off
UL, TÜV and VDE approval
Housing 140 x 150 x 86mm (PS / 2 design)
Robust universal office and industrial power supply

Maintenance and instructions for the Han FSP300-60PFN adapter:
1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:Han FSP300-60PFN Adapter,Han FSP300-60PFN Charger,Han FSP300-60PFN Power Supply,replacement adapter for Han FSP300-60PFN,Han power supply FSP300-60ATV (pf).

Shenzhen WenZhan electronic technology co., LTD. Is a professional SMT pick&place machine and the machine parts service providers.Company mainly provide SAMSUNG SMT machine parts/YAMAHA SMT machine parts/FUJI SMT machine parts/ ,

PANASONIC SMT machine parts/JUKI SMT machine parts/SONY SMT machine parts’ sales and maintenance services.

Our company supplies different kinds of products. High quality and favorable price.
We're pleased to get your Inquiry and we will come back to as soon as possible.
We stick to the principle of "quality first, service first, continuous improvement and
innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. T
o perfect our service, we provide the products with good quality at the reasonable price.

Photos on exhibition

SMT machines and related products:
1.SMT equipment and accessories,nozzles, feeder, feeder parts, cutter, filter, guide, tape, mortor, belt, cylinder,

smt grease/lubricant, THK grease gun ,bearing,SMD parts counter,sensor etc.
2. Nozzles & feeders&their parts for fuji, for Juki, for Yamaha, for Samsung, for Siemens, for Panasonic,

for Sony....etc,all of them have large stock.
3. We sell and recycle used SMT machine