Detailed data :
Brand: | Panasonic | Model: | MSMA022S2F |
Input : | three phase | Voltage : | 92v |
Current : | 2.6A | Power : | 0.2kw |
Freq.: | 200Hz | r/min : | 3000 |
MSMA022S2F Panasonic 92v Low Voltage Input AC Brushless Servo Motor
A digital control system has emerged, and the control part can be
completely carried out by software, known as "fuzzy" or
"intelligent" permanent magnet AC servo systems. So far,
high-performance electric servo systems mostly use permanent magnet
synchronous AC servo motors, and control drivers mostly use fast
and accurate positioning full digital position servo systems.
Typical manufacturers include Siemens from Germany, Colmorgan from
the United States, and companies such as Panasonic and Yaskawa from
Japan. The small AC servo motor and driver produced by Panasonic
Motor in Japan, with the large inertia series suitable for CNC
machine tools and the medium inertia series suitable for robots (*
with a speed of 3000r/min and a torque of 0.016-0.16N. m). We also
launched a small inertia series. In the 1990s, new A4 series and A5
series were launched successively. Changed from the old series
rectangular wave drive, 8051 microcontroller control to sine wave
drive, 80C, 154CPU, and gate array chip control.
For Panasonic drives, if you want to use closed-loop control of the
drive, you must read the encoder position of the drive. How does
the PLC read the encoder value? Panasonic provides an RS232/485
interface and supports free port communication. However, in order
to ensure safety, Panasonic drivers provide a very complex
verification formula and require multiple bilateral communications
to ensure communication accuracy. From this perspective, the
scalability and safety of Panasonic servo are quite high. A single
servo driver can use 232, and in multiple cases, 485 can be scanned
repeatedly for control, and so on. But the problem lies in Omron's
end code for receiving instructions; Let's take a look at Omron's
software. 1. Set the end code. The format of Panasonic's free port
communication is fixed and cannot be used. 2CR and LF cannot be
used for the same reason as above. The third one accepts a fixed
number of bytes, 0-256. But if you fix this number of bytes, it
means you need to send so many bytes every time.
In the industrial field, especially in the fields of numerical
control, machine tools, etc., due to the need to control non
electrical signals such as position, speed, torque, etc., and the
increasing demand for accuracy in industry, manual control of these
signals is basically unable to meet the requirements of use. This
requires the use of automatic control systems, which also reflects
the advantages of servo system design. In the field of small and
medium-sized mechanical transmission, it is necessary to achieve
high position control of equipment, and an important basic
condition for achieving position control is the need for
high-precision execution mechanisms and coding feedback mechanisms.
And the Panasonic MINASA4 series servo system meets this
requirement. When the requirements for pulse equivalent and feed
speed are too high, traditional stepper motors or DC servo motors
will face a series of problems, such as insufficient accuracy and
unstable torque during operation. This traditional device is
difficult to implement, with many additional accessories and high
cost constraints. However, the Panasonic MINNASA4 series servo can
achieve extremely high position control accuracy at a lower cost.
Condition:
A brand-new, unused, unopened, undamaged item in its original
packaging (where
packaging is applicable). Packaging should be the same as what is
found in a
retail store, unless the item is handmade or was packaged by the
manufacturer
in non-retail packaging, such as an unprinted box or plastic bag.
See the
seller's listing for full details.
Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing
and
inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for
protection.
Shipping:
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT
and other
fees applied by their respective countries.
All shipments are fully insured.
Our advantage Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack