1.8m Diameter Jacking Marine AirBag High Pressure Marine Air Bags

1.8m Diameter Marine Jacking AirBag High Pressure Marine Air Bags

Marine Airbags Introduction:

1. Some users use the Marine rubber airbag for the first time;For Marine launch airbags selection is not very professional, in this case, the user contact the air bag factory and provide the ship length, width, dead weight tonnage, slipway slope and other information, the factory will design the most cost-effective Marine air bag for the user to use according to these data

2. Lifting airbag is to use the high bearing capacity of Marine airbag to jack up the ship from the slipway, so that there is a large space between the ship and the slipway, convenient for placing launching airbag, so that the ship launches smoothly. The production requirements of lifting air bag are very strict, and the overall winding process must be adopted, and the thickness should generally reach 10 layers.

3. The integral winding process refers to the use of a single integral glue cord from the beginning to the end of the hanging cord, and no lap or stitching process is allowed; Each layer should be wound to form a cross wound with an Angle of 45 degrees.

Marine rubber airbag performance

General specifications for Marine rubber airbags

The preparation work of Marine airbag before use

1. Clear and clean the sharp objects such as iron on the berth to avoid scratching the Marine airbag and causing unnecessary losses.

2. Place the Marine airbags at the bottom of the ship at a predetermined distance and inflate it. Obact the rising state of the ship and the pressure of the air bag at any time.

3. After inflating all Marine airbags, check the state of the air bags again, check whether the ship is balanced, and check whether the berth is clean and tidy.

4. The most important thing for the ship to use the air bag to launch is the stern first, and the stern first introduces the water surface; If it had gone the other way, the propeller at the back of the boat would have scraped the air bag, causing a safety accident.

Marine airbag product picture

Service tenet:

Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;

Rigorous and pragmatic, considerate; Serve every user attentively.

After-sales service:

1. All products of the company are produced in strict accordance with ISO17357:2014 standards.

2, the company's products in normal use, the life of 8-10 years.

3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.

4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.

5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.

6. Instruct or participate in the implementation and application of products to various projects.

7. Provide pre-sale, in-sale and after-sale services

Qingdao Jiexing Marine Equipment Co., Ltd. is a wholly owned subsidiary of Qingdao Beierte Marine Technology Co., LTD.

Qingdao Jiexing Marine equipment company mainly contracts import and export projects. The company set design, research and development, production in one; The main production of Marine fender, pneumatic rubber fender, yokohama fender, Marine launch air bags, foam filled fender, salvage air bags and other rubber products.

The company pioneered the use of nano polymer materials, raw materials, semi-finished products, finished products with data, product performance is improved by 10%, its molding process for the overall winding, tensile strength, elongation, hardness, adhesion, aging resistance, fixed body and other comprehensive indicators, far higher than the industry standard.

All products of the company have passed ISO9001:2008 quality management system certification and product quality certification of CCS, ABS, BV, DNV, GL, LR and other classification societies, and are insured by PICC property insurance.

The company fender products for CNOOC, Zhenhua Heavy Industries, Shanghai Shipyard, China Merchant Heavy Industries, CIMC Raffles and other large enterprises designated procurement qualified suppliers; And sold to the United States, South Korea, Southeast Asia, Indonesia, Russia and other countries and regions

The company with high quality products, perfect after-sales service and good reputation, won the trust of the majority of users. We sincerely look forward to cooperating with you for mutual benefit and a better tomorrow.

General Manager's Office

Ministry of Commerce

Office building

corner of the factory

A corner of the production workshop