Stainless Steel Cage Zro2 Ceramic Bearing 609LL For Finger Skateboard

Full Ceramic Si3N4 ZrO2 ceramic bearings With High Speed

The hybrid ceramic ball bearings shown in the dimension table below have stainless steel rings and ceramic balls. The rings are made from AISI440C, 304 or 316 stainless steel. The ceramic balls are made from ZrO2, Si3N4 or Sic.These hybrid ceramic bearings are available from stock in the Tarso company without a cage (full complement) or with cages made from PTFE. We can also offer our hybrid ceramic bearings with PEEK or 316 stainless steel cages.

The hybrid ceramic bearing balls has the advantage of low density,low friction, high strength, electricity & magnet resistance and lubricant free. 1.5 times up high speed compare with stainless steel bearing. Life time increase 2 or 3 times compare with stainless steel bearing. Applicable for temperature up to 220℃.

Application of ceramic ball bearings:

1. Ceramic ball bearing has the characteristics of high temperature resistance, cold resistance, abrasion resistance, corrosion resistance and insulation, and can be used in extremely bad environment and special conditions.

2. Ceramic ball bearings can be widely used in aviation, spaceflight, navigation, petroleum, chemical industry, automobile, electronics, metallurgical, power, textile, pumps, medical equipment and scientific research.

Features of ceramic ball bearings:

(1) Shield / closure: Open, Teflon Sealed, Rubber Seals,2 Metal Shield

(2) Tolerance codes: ABEC-1, ABEC-3, ABEC-5, ABEC-7, ABEC-9

(3) Vibration level codes: V4, V3, V2, V1

(4) Internal clearance codes: C0,C2, C3, C4, C5

(5) Material: AISI52100, AISI440C, AISI304, AISI316, Ceramic

(6) Retainer: PTFE, Nylon, PEEK Or Stainless Steel

608 8x22x7 full ZrO2 ceramic bearing 8x22x7mm

Our hybrid ceramic bearings are available open or with PEEK seals. Some sizes may also be available flanged

The full ceramic ball bearings listed below are supplied with rings and balls made from zirconium dioxide (ZrO2). These zirconia bearings are available as full complement (no cage) or with cages made from PTFE, PEEK or 316 stainless steel.

These are non magnetic, non-conductive and highly corrosion resistant to most chemicals although ZrO2 bearings are not recommended for prolonged contact with steam. Full complement bearings or those with a 316 stainless cage can be used up to 400°C while bearings with a PEEK or PTFE cage can cope with temperatures of up to 250°C. For temperatures below -70°C, PTFE or 316 stainless steel cages are preferred. Standard radial clearance for full ceramic bearings is C0 but other clearances can be supplied to order.

ZrO2 ceramic bearings are generally used for their extreme temperature capabilities, excellent corrosion resistance or non-magnetic properties. Other sizes can be supplied on request.

Shaanxi Fortune Industries Co.,ltd located in Xi’an of the oldest city in China. We have experience for over 15 years, As a professional exporter in Ball & Roller Bearings and Auto Parts on standard and nonstandard, our success is based on:

High Quality Bearing at the Good Price
In this competitive world economy it is critical that we provide you with a bearing that meets your different requirements at an affordable price. We can offer bearings at multiple price points from hundreds of factories established stable relations with us in China.

Experienced Staff
We target specific automotive industries, learn about their particular uses and bearing needs, and supply exactly what is required. We have specialists on staff who understand these markets and can respond promptly. we would be glad to create most suitable solution for your needs.

Bearing in Variety
You will find thousands kinds of bearing on standard on our Website: www.sft-bearings.com, we trust you can choose bearing you required. If you can not identify your bearing, Just tell us the dimensions we offer bearing on non-standard.

Professional Service
Our technical team are experienced in automobile bearings, industry bearings, We are able to provide support on bearing selection, design optimization, product development, bearing mounting, bearing maintenance, lubrication and etc.

Quality control system

In 2011, We have been awarded Quality Management System Certificate No. 00111Q25911R0S / 6100 for compliance with the standard ISO9001 : 2008　＆　GB/T 19001 - 2008 apply in Export of Bearing and Auto Parts.

Bearings and More
In addition to ball and roller bearings and auto parts, we also carry Linear Motion, Roller Chain, Motorcycle Sprocket and more. Please view our website.

Today, All of our products have been exported to dozens of countries and regions all over the world, such as Europe, America, southeast Asia, middle east, Africa etc. and products are used in a broad range of applications, including automobiles, railways, steel industry, motorcycle, agriculture machine, wind turbines, papermaking machine, office equipment, machinery tools etc.

We do best spare parts and transmission parts for you!