Rated Power 125KW Aluminum Brazing Furnace 380v Four Zone Heating 50Hz

Rated Power125KW Aluminum Brazing Furnace 380v Four Zone Heating 50Hz

Aluminum Brazing Furnace introduction

The equipment is equipped with improved technical performance on the basis of the original box-type heat treatment furnace, which is suitable for brazing of automobile air conditioning pipe belt type two and tube belt oil cooler, and aluminum small intercooler. The furnace is a cyclic brazing furnace. The working size is 800×500×1200 (mm), and the heating method adopts top, bottom, two sides and four sides heating.

The furnace body is welded by section steel and steel plate, the inside is pressed to release the furnace gall, the outer layer has a heating element, the heating element is heated by OCr25Al5 resistance wire, and then the outer layer has a lightweight refractory brick to make the furnace, the outside of the furnace is a refractory insulation material (using Shandong Luyang aluminum silicate throwing blanket), the appearance is a steel plate, the heating element is distributed on the top and bottom of the furnace gall, the left and right walls, and the layout is reasonable. Furnace gallbladder.The furnace bladder is made of 1Cr18Ni9Tiδ(Ti type austenitic stainless steel)=6mm, welded and formed by stainless steel plate, the space size in the furnace bladder is 1000×700×1400mm, the working size is 800×500×1200mm, the bottom surface is flat, and the upper part is arc-shaped.

Aluminum Brazing Furnace quick details

Aluminum Brazing Furnace Feature

1. Increase productivity

2. Low investment cost

3. Suitable for small batch production

4. Small size

5. The workflow is simple

FAQ

1. Is it convenient for workers to operate the semi automatic crimping machine?
The semi automatic crimping machine,the workers only needs to train simply to operate the machine and the operation is convenient and simple.

2. How many types of automatic crimping machine?what ‘s the features of it ?
We can divide them into three types.
A. The first one is single side single crimping head automatic crimping machine.The features are using simply,cheap price.But because the single crimping head tools have the long working cycle,the working efficiency is low.The narrow side tab needs to compress with hands.
B. The second one is single side two crimping heads automatic crimping machine.The features are two crimping heads can work at the same time.The speed and the efficiency is high.The narrow side tab needs to compress with another tools.

3. How many models type can automatic crimping machine system store?
Because is PLC interface setting,is can store most 200 different models and positions of tanks and it basically covers most of the model of cars.

Our company has been engaged in the manufacture and development of auto radiator condenser products for more than 15 years. Most of the products are sold to various countries and regions in the world, and we have accumulated rich production experience.

With the development of the heat exchanger industry, more and more countries and regions are committed to building local radiator condenser factories. With our knowledge of the industry, we have been helping foreign clients set up radiator factories in this region for the past five years. We provide customers with pre-sales and after-sales equipment design and service according to product size. We will send technicians to guide the installation on site, ensure the smooth production of the customer's factory, and provide free consulting services when there are any questions during the production process. At the same time, our company provides customers with various hardware and plastic parts required for radiators and condensers. Ensure the supply and quality of finished products.

If you are interested in setting up a radiator factory in your place, please contact us, we will provide you with the best service.