

Add to Cart
Managed Ethernet Fiber Switch 4 Gigabit Optical and 8 Gigabit Ethernet Ports
Technical Parameters
Model | AEO-814M-IU-2 |
Backboard bandwidth | 20G |
Cache | 2M |
MAC address table | 16K |
Maximum frame length | 10K |
Network port | 8 10/100/1000Base-T(X) RJ45 ports |
1000Mbps fiber port | 4 gigabit optical module |
Fiber wavelength | 1310nm/1550nm(single mode single fiber) |
Optical fiber port transmission distance | 20km (single mode single fiber) can be customized to 100km |
Optical transmission power | -10~-2 dBm |
Optical RX sensitivity | ≤-24 dBm |
Shell material | Aluminum |
Protection grade | IP30 |
Heat dissipation mode | internal heat sink energy circuit heat dissipation, no fan silent design |
MTBF | 100,000 hours |
EN61000-4-2 anti-static | ±8KV contact discharge;±15KV air discharge |
EN61000-4-5 surge voltage | ±2KV/CM,±2KV/DM power cable,±2KVdata cable |
Rated input voltage | DC12-48V |
Power terminal | 5 pin terminal interface |
Power | ≤5W |
Working temperature | -40 ~ 85℃ |
Working humidity | 5% ~ 95%(non-coagulation) |
System Overview
Managed Din Rail HD Cascading Ring Network Optical Switch uses the
design of industrial redundant ring net, and you can find two fiber
ports which make up the ring net in every transmission equipment.
The ring network topology structure is composed through hand in
hand cascading, which can achieve no phase delay transmission of
the 1080p HD network signals. The purpose of industrial redundant
ring net design is to achieve the stability, reliability and
instantaneity of the data transmission in a harsh environment. The
working principle is that the network signals become ring structure
in physical connection while chain structure during work. Once out
of connection in the transmission optical cable, the device would
switch to the spare line to transmit. The redundant ring net
structure not only reduces the risk of data signals transmission,
but also simplifies the project installation and lowers the project
costs.
Product Features
Supporting all the network HD cameras and other network signals;
Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other
internet protocol;
Supporting the transmission pattern of full-duplex and
half-duplex, with the ability of automated negotiation;
Having the function of setting ring net in all the devices, and
change transmission while the disconnection of the intermediate
node;
Providing the transmission of ultra low delayed data;
Protecting from network broadcast radiation;
Providing 4 set adaptive Ethernet port, which can link with
internet camera, the switch and so on;
Adapting parallel or cross-wire connection;
Having APC circuit, with constant optical power output and wide
dynamic range;
100Mbps/1000Mbps optical fiber transmission, with large capacity
which could be upgraded easily;
Having advanced adaptive technology, no field of the use of
optical or electrical adjustment
Adapting three-level lighting protection technology on the
computer ports and network signals.
Support dial the code switch to set up monitoring mode function,
extended the IPC access distance
to be 200M
Support VLAN function: Block mutual communication between downlink
ports; improve the efficiency of data forwarding to ensure the
safety of system, inhibit network storm functions: automatic
identification and filtering broadcast packets.
Support the din rail & desktop installation
Support the CBIT to ensure the HD image.
Built-in The United States Marvell and Broadcom industrial switch
IC. High-speed processing capability and capacity of the cache,
ensure a stable and reliable network.
Fanless cooling circuit design, built-in heatsinks, thermal
adhesive, such as multiple thermal structure design makes it in all
kinds of consistent performance in harsh environment, operating
temperature ranges up to -40℃ ~ +85℃.
Design with internal device precision compact size, in full
consideration of the space requirement for installation.
Support for ring network redundancy and RSTP, network fault
self-recovery time is less than 20ms.
Support for SNMP, provides both WEB and 0console management, easy
to configure.
Support 802.1Q VLAN, meet the requirements of Division and
management of network resources to enhance network security and
ability to adapt to many business applications.
Support port isolation, port speed, broadcast storm suppression,
ensure network security.
Support for IGMP snooping, and meet the needs of multicast
traffic.
Support for port gathering, scalable connection bandwidth, and
meet the needs of high-bandwidth connections.
Supports QoS for traffic control and management, and meet the
needs of different business on the Internet.
Industry-standard design, high strength metal enclosure, IP30
protection.
Support for high level electromagnetic compatibility protection,
support electrostatic discharge immunity, radiated electromagnetic
field immunity, support electric fast transient burst
anti-Rejection, support the surge immunity.
Support for a wide range of redundant dual DC power input, Power
overload protection, Anti-reverse polarity protection.
Application Diagram
Packaging & Shipping
●All of our package are international standard package
●We will deliver our products as soon as the order confirmed