Product Details
5gallon water filling machine gallon bottled water filling machine
Brief introduction of 3-5 gallon water filling machine
This filling line specially for 3-5gallons barreled drink
water,with type QGF-100, QGF-240, QGF-300, QGF-450, QGF-600,
QGF-900, QGF-1200. It intergrates bottle washing, filling and
capping into one unit. In order to achieve the purpose of washing
and sterilizing , the washing machine use multi-washing liquid
spray and-thimerosal spray. This thimerosal can be used
circularly,The capping machine can cap barrel automatically ,this
line equips with water spraying device in order to ensure those
caps sterilizer and clean .it also can automatically carry out
barrel ,washing,sterilizing ,filling ,capping ,counting and
products discharging ,with complete function ,modern design and
high degree of automation ,it is a new kind of barreeled water
auto-production line ,which intergrates mechanism ,electricity and
pneumatics technologies together.
Filling Machine Benefits
1) QGF series automatic production line is specializes for
production of 3-5 gallon barrel.
2) The machine consists of washing,filling and sealing in one.
3) The bottle washer adopts multi-channel washing liquid injection
and disinfectant injection for the purpose of washing
sterilization.The disinfectant is recylable.
4) The sealing machine can start sealing automatically and the
bottle conveying port is equipped with a sanitation device to
ensure the sanitation of cap.
5 )Using the advanced PLC(Programmable Logic Controller) technology
6) The major electrical apparatus are all products of well-known
brands, such as SIEMENS, MITSUBISHI, Schneider and OMRON
7) Enhanced food safety: Stainless steel 304/316L for all
components in contact with your beverage
8) Optimum uptime: 30 % reduction in changeover and maintenance
downtime
9) Sustainable solution: Reduced filler enclosure and servomotors
reduce resource consumption
10) Hygiene improvement through volume control and contactless
filling
11) Automatic dump bottles: Safer, easier cleaning procedures
12) Automatic bottle changeover improves uptime
| QGF-150 | QGF-300 | QGF-450 | QGF-600 | QGF-900 | QGF-1200 |
| | | | | | |
| | | | | | |
| |
| |
| |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
Flow chart of 5 gallon filling line
Automatic bottle decapper⇒Automatic bottle brush washer⇒Automatic
bottle loader⇒Automatic bottle washer filler capper⇒Automatic cap
washer⇒Automatic light checking and sealing machine Decapper of 5 gallon filling machine This de-capping machine is designed for 3 & 5 gallon bottle in
water production line. It's used to pull out the cap of recycling bottle before rinsing. A combination of digital camera and fiber optic detectors allow to
reject the bottles returned in the following conditions: Bottles without caps, Caps without plugs, Caps with just the top
part left, Caps partially opened, Not removed caps.
Outside Brush of 5 gallon filling machine Brushes are motorised and clean the bottle externally. Since they
make the bottle spin, the water jet hits not only the bottom but also the sides of the bottle. It's used forall-round cleaning the bottle, significantly improves
cleaning efficiency.
Washer of 5 gallon filling machine 1. It is designed for 5 washing treatment.
2. It can manage 5 liters to 5 Gallons bottles.
3. Automatic bottle unloads and out load.
4. Neck handling of the bottle by the grippers.
5. Lack of point with water stagnation.
6. Automatic disinfection of the rinsing area. 7. Change-over easy
and with no downtimes.
8. Easy access for ordinary maintenance.
Filler of 5 gallon filling machine 1. Uploading and dropping barrels changed from 45 degree to
translatory which is more stable. 2. Nozzle can insert into 10-15cm
of the barrel in order to rinse little impurities down. Rinsing
pump is separately controlled by different magnetic valves. Pump
only work when there is barrel on that. It can avoid the mixture of
different cleaning fluid.
Capper of 5 gallon filling machine
The PRESS-ON CAPPER is a linear machine used for caps applied on
the bottle by pressure.
It includes: Cap hopper, Canal chute, Placing system of cap on the
neck, Device to snap the cap on the neck. Specific systems to
sterilize the caps in order to avoid the contact of contaminating
agents present on the cap with the bottle neck. The bottle takes
the cap directly from the canal chute. The snapping of the cap on
the bottle neck is carried out through the pressure developed by a
belt conveyor, provided with a system to adjust the force in order
not to stress the bottle.
Company Profile
Zhangjiagang Aquatrin Machinery Co.,LTD is a professional manufacturer engaged in the Suppply Beverage
Bottle Filling machine,5gallon filling machine ,Labeling
machine,Package machine ,Water treatment machine. complete bottling
production Line.,
The company was established in 2015years, has many enterprises at
home and abroad to establish a long- term friendly business
relationship. We are located in Zhangjiagang city jiangsu Province,
China. Near shanghai city, With convenient transportation access.
Dedicated to strict quality control and thoughtful customer
service, our experienced staff members are always available to
discuss your requirements and ensure full customer satisfaction.
