24V 50000mAH LiFePO4 Solar Battery Bank Consumer Electronics Battery 1280Wh

2 Years Warranty 24v 50AH Lifepo4 Cell For Consumer Electronics , Solar Energy System

Description of LiFePO4 Battery

1. Very suitable for RV and replace the traditional lead acid battery with battery size: 395mm x 110mm x 286mm.

2. More than 2000 cycles @ 80% DOD.

3. High discharging current capacity, working well with most of inverters in the market.

4. Prismatic cells UL 1642& UN38.3 & ICE62619 certified, packs CE & UN38.3 & MSDS.

5.Series & Parallel connections are available.

6.OEM & ODM service are availble.

Period of Warranty

The period warranty 24 months from the date of shipment. Maximum guarantees to give a replacement in case of battery with defects proven due to manufacturing process instead of the customer abuse and misuse.

Specification of Lifepo4 Battery 24V 40AH

Battery Management System(BMS)

The battery Management system (BMS) installed in every battery ensures that the battery in the event of under voltage or overload switches off and automatically again turns on as soon as the problem is resolved.

APPLICATION AREAS

Suitable for RV, Caravan, Marine, Camper, Electric scooter, Golf Carts, Power wheels, Trolling motor, Tool trailer, Backup power supply, Solar, off-grid, etc.

Battery Benefits

High performance traction/storage battery

Integrated (BMS) battery management system

Safe lithium technology (LiFePO4)

High cycles life time more than 2000 times @ 80% DOD 25℃

Hign max continuous discharging current

Light weight

One to one replaceable with lead acid battery

Low self-discharge

Install the LiFePO4 battery

Lithium LiFePo4 batteries are heavy. Make sure it is adequate and safe attach and always use the appropriate transport equipment.

In an accident unsecured, batteries could become a projectile! Always take carefully with lithium batteries.

Make absolutely sure that the LiFePO4 battery is not connected with reversed polarity.

Should the battery be connected incorrectly, the BMS electronics will be irreparably damaged and must be replaced with a new BMS board. This is not a warranty case.

Important instructions

Do not open the LiFePO4 battery without consulting the dealer. Unauthorized opening of the battery voids the manufacturer's warranty.

▪ Only use the battery for the application for which it is intended.

▪ Do not short-circuit the LiFePO4 battery. The cable connections to the consumers must go through a backup to be protected.

▪ Installation and maintenance may only be carried out by qualified specialists.

▪ Do not expose to permanent direct sunlight. Protect from the effects of heat. Temperatures above +60 ° C can damage the battery.

▪ Use only compatible chargers. The battery is in a longer storage of all disconnect devices.

▪ Pay attention to proper assembly.

▪ Avoid damage of any kind, for example by falling, drilling, etc. (Risk of short circuit).

▪ Always keep the battery dry and clean.

▪ Note the plus (+) and minus (-) markings on the LiFePO4 battery and the device and pay attention to the correct polarity.

▪ The cycle capacity may vary due to the change in the working temperature and the charge and discharge rate differ from the nominal capacity.

▪ Suitable for parallel connection maximum four batteries (If need series connection, the BMS should be customized with higher cost).

Before connecting, bring to the same charge level. Batteries from different manufacturers or different types should not be interconnected.

FAQ:

Q1. Can I have a sample order?

A. Yes, we welcome sample order to test and check quality.

Q2. Do you have any MOQ limit?

A.Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample order is available. Low MOQ, 1pc for sample checking is available.

Q3. How to proceed with an order?

A. Firstly let us konw your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places a deposit for formal order. Fourthly we arrange the production.

Q4. Is it OK print my logo on the product?

A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q5. Which certificates do you have?

A. We have CE/FCC/ROHS/UN38.3/MSDS ... etc.

Q6. How about warranty?

A. 2 years warranty.

Bely, a professional company is specialized in lithium battery cells and battery module pack that integrates R&D, production, sales and relevant services. Sales team is located in Shenzhen China. We own two battery cells outsourcing production bases in Shandong and own our battery packing factory in Dongguan.

There are more than 10 experienced engineers who are in lithium battery industry and BMS industry for more than 15 years. Core solutions are developed by ourselves and we can develop according to customers' requirements for BMS function, pack size and capacity customization. Now Bely's lithium batteries are widely used in many area.
Bely has passed ISO9001:2015 quality system certificate. Almost all batteries have passed CE, UN38.3, MSDS certificates and approvals. For other certificates required by the customers, Bely can assist to pass with our reliable labs.
With the backup of strong R&D team, the high efficiency management, the rich manufacture experience, the advanced production technology and equipment, Bely has developed rapidly to become the high quality lithium battery pack manufacturer.
Bely has been constantly transcending itself, creating customer value, integrating industry resources, activating business organization, actuating the industrial transformation and developing its position in international battery industry.
Bely always provides the professional service and good quality products to the customers all over the world. Bely is committed to "Enjoy the life with Bely energy!"