Product Details
PHiliphh Goldway Part No 865492 Multiparameter Module For G60
Modular Patient Monitor
To perform a multi-parameter block connection test:
1. Insert the module into the G60 Modular Patient Monitor module
slot or Flexible Modular Server (FMS).
2. Turn on the monitor.
3. Check the module light.
If lit:
On = Module is properly connected.
Not lit = Module is not connected properly.
(See the yellow rectangle in the picture below)
4. Press the main menu button and check that the display shows the
main menu. (See the picture in the green rectangle below.
Product Name | PHiliphh part no 865492 Multiparameter module for G60 Modular
Patient Monitor
|
Brand | PHiliphh Goldway |
Part No | 865492 |
Use for | G60 patient monitor |
Use place | Hospital Devices; Medical Care; ICU; |
Warranty | 90 days |
Delivery Time | 3-5 working days |
In addition to the basic parameters, the multi-parameter module
(MPM) has optional parameters: IBP1/IBP2 and 12 lead ECG. The
following disassembly procedure applies to both MPMs.
Note :For the multi-parameter module with 12 lead ECG function, a
symbole ( ) will be printed on the left conner of the multi-parameter module.
Remove the Rear Case
- Use a utility knife or flat-blade screwdriver to remove the two
white plastic nuts on the back
- Remove the two M3X8 screws and washers.
- Use the modular rivet wrench to remove the two rivets
- Carefully invert the MPM on a soft surface. Use a flat-blade
screwdriver to pry off one end of the module rail
- Insert a second flat-blade screwdriver into the slot on the bottom
of the module rail to release the rail latch as shown.
- Slide the module rails in the direction shown in the figure and
remove the rails.
- Repeat steps 4 through 6 above to remove the second module rail.
Remove the two M3x4 screws shown
Separate Main Frame and Front Panel Assembly
- Remove the cable and two M3x6 screws from the right side of the
front panel
- Remove the two M3X6 screws on the left side of the front panel.
- Carefully remove the main body and screen assembly
- Disconnect the SpO2 connector cable, the NIBP / TEMP connector
cable (on the front panel), and the NIBP connector tube.
- Remove the main body and front panel
Remove the ECG Board
- Remove the four M3X6 screws
- Gently pull up the ECG board and remove the NIBP/TEMP connector
cable (to ECG board).
Remove the SpO2 Board
- Remove the SpO2 connector cable
- Remove the two white plastic M3X6 screws.
- Gently pull up the SpO2 board and remove it. Note the orientation
of the board using the circled connector shown
If you're interested in PHiliphh Goldway Part No 865492 Multiparameter Module For G60
Modular Patient Monitor ,feel free to contact us .Thank you .
Company Profile
China World Technology Medical Equipment Service Group is a company
engaged in medical equipments/repair parts and accessories products
trading company. The company was established in September 2005, has
many famous enterprises at home and abroad (such as America USCO
company) to establish a long-term friendly business relationship.
Company mainly engaged in patient monitor and other medical machine
products. Since its inception continue to absorb a variety of
talents, improve product quality, improving staff quality, in order
to grow their companies. Strict quality guarantee system and
perfect management system, high-quality products after-sales
service is our foothold in this, my company of "quality first,
reputation first" principle, provide customers with quality and
quantity of various types of products. Always uPHiliphold the
"quality, integrity and pragmatic, motivated, service-oriented"
business PHiliphilosoPHiliphy, and applies the company's management
and operating among. The face of fierce competition, the company
system is constantly being improved, relying on science and
technology, continuously improve the technology content of products
sold, for society, customers and companies to create a higher
market value. Our company has been in good faith to create
enterprises, to credit management market, has won a good
reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws,
regulations and rules of the WTO requirements management according
to law, actively participate in regional economic.Business
prospects and good, the next time, our company will expand the
scale of operation and steady development of corporate economic,
sincerely seeking partners, good faith cooperation and seek common
development, writing a new chapter in medical equipment field.