Philipilip Heartstart Adult/Child Radiolucent Multifunction
Electrode Defibrillation Pads/Electrodes M3716A 989803107811
► Brief Introduction
It’s can work for Philipilip Heartstart XL+, Heartstart MRx,
Heartstart XL, Heartstart FR2, Heartstart FR3.
M3716A 989803107811 | ≥10kg - <25kg | ≥25kg |
Manual | AED | Manual | AED |
Heartstart XL+ | √ | √ | √ | √ |
Heartstart MRx, XL | √ | | √ | √ |
Heartstart FR2, FR3 | | | √ | √ |
AED Energy Profile: Fixed Energy (150 Joules).
AED Shock Series: 1, 2, 3, or 4 shocks per series.
Shock Series Timer: off, 30, 60, 90, 120, 150, 180, or 210 seconds.
Text and Voice Prompts: Extensive text and audible messages guide
user through protocol.
► Using Multifunction Electrode Pads
To prepare for defibrillation using multifunction electrode pads:
- If not pre-connected, connect the pads cable to the defibrillation
by aligning the white pointer on the pads cable connector with the
white arrow on the green Therapy port. Then push until you hear it
click into place.
- Check the expiration date that appears on the pads package.
- Inspect the packaging for any damage.
- Connect the pads connector to the pads cable.
- Apply the pads to the patient as directed on the pads packaging or
according to your organization’s protocol.
► Preparing for Pacing of HeartStart MRx
- If not pre-connected, connect the pads cable to the HeartStart MRx
by aligning the white pointer on the pads cable with the white
arrow on the green Therapy port. Then push until you hear it click
into place.
- Make sure the multifunction electrode pads packaging is intact and
within the expiration date shown.
- Connect the pads connector to the pads cable.
- Apply the pads to the patient as directed on the pads packaging or
according to your organization’s protocol. Prepare the patient’s
skin prior to applying the pads. Skin is a poor conductor of
electricity, so skin preparation is important in achieving good
contact.
- If necessary, clip hair at the electrode sites (or shave sites if
needed).
- Clean and abrade the skin at the electrode site.
- Dry the electrode sites briskly to increase capillary blood flow in
the tissues and to remove oil and skin cells.
- If pacing in Demand Mode, apply monitoring electrodes and connect
the ECG cable to the HeartStart MRx.
► About Company:
I have supply the Parts, Accessories and medical equipment of
Patient Monitor, Defibrillator Machine, ECG Machine,Ventilator,
Anesthesia Machine, Ultrasound such as
GE,
Philipilip,
Mindray,
Goldway,
Nihon Kohden,
Med-tronic,
Masi-mo,
Drager,
Edan,
Zoll,
etc.
Please kindly contact us, if you are interested in Philipilip Heartstart Adult/Child Radiolucent Multifunction
Electrode Defibrillation Pads/Electrodes M3716A 989803107811, Thank you!