PHiliph MP70 Patient Monitor Parts LCD Display Backlight Inverter Board High Voltage Board

Brand Name:PHiliph
Model Number:MP70
Minimum Order Quantity:1
Delivery Time:3-5 working days
Payment Terms:T/T, Western Union,PayPal
Product name:PHiliph MP70 High Voltage Board
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou Guangdong China
Address: TianHe District,GuangZhou,GuangDong
Supplier`s last login times: within 33 hours
Product Details Company Profile
Product Details

Hospital Medical Equipment Parts PHiliphhilip MP70 Patient Monitor LCD Display Backlight Inverter Board High Voltage Board


► Brief Introduction

The AC/AC adapter converts AC power from the power plug to a 48-volt/120-watt continuous current source and isolates the monitoring system from AC power pipes. 48 volts are distributed across the power transmission and power is provided to all components of the system: the 56 V DC power needed for the FMS, MMS and measuring server is created by a DC insulator adapter. The power needed for backlighting is converted to 12V DC by dc/DC backlight adapter. The CPU is equipped with a 3.3 volt and 5-volt continuous current capacity. The conversion is made in two steps: the first DC/DC adapter is a power regulator that reduces the differences caused by load changes to the 48V power transmission. Interface panels require 10-volt power. The HIF and LED panel is equipped with an unregulated 12-volt capacity. The compact unit slot requires a 5-volt unit slot and uses 48 volts and another continuous current/current adapter to create 60 volts to provide power to modules.


Removing the Backlights

1. Remove the two screws that hold the backlight assemblies in place.

2. Remove the cables from the backlight inverter board and slide the backlight assemblies gently out of the side.


Integrated Display is blank

SymptomsPossible Causes of FailureFailure Isolation and Remedy
Integrated display is blank or brightness is reducedBacklight Inverter Cable not connectedCheck cable connection of Flat Panel AdapterBoard to Backlight Inverter Board
Backlight Inverter board defectiveIf backlight tubes have already been replaced, replace backlight inverter board.

Power Specifications

Power consumption< 145 W
Line Voltage100 to 240 V ~
Current1.6 to 0.7 A
Frequency50/60 Hz ~

Electrical Requirements

Line Voltage Connection

The MP60/MP70 monitor uses < 145 W (1.6 to 0.7 A).

Line Voltage

The MP60/MP70 monitor may be operated on ac line voltage ranges of 100 to 240V (50/60 Hz).


Voltage ranges:

90V to 264V (13.5A fuse)

Voltage selection:

Wide range input, no voltage selection required


Quality Instructions

Our company has one department to work on a specialty basis, a very cooperative group, and a rich technical strength for the development of medical machines. Our expert team provides quick and reliable solutions for sales and repairs on the patient's screen, defibrillator, ECG/cardiac drawing machine and other accessories or repair parts. We have always focused on producing high-quality products and providing first-class customer service. What calls for special attention is that there are new products used for sale alike. Please remember to distinguish them carefully when submitting your applications. Otherwise, it will cause unnecessary problems. If you have any doubts about the quality of the product, feel free to contact us. We will respond to you as soon as possible


Please kindly contact us, if you are interested in PHiliphhilip MP70 Patient Monitor LCD Display Backlight Inverter Board High Voltage Board, Thank you!


China PHiliph MP70 Patient Monitor Parts LCD Display Backlight Inverter Board High Voltage Board supplier

PHiliph MP70 Patient Monitor Parts LCD Display Backlight Inverter Board High Voltage Board

Inquiry Cart 0