

Add to Cart
PageWriter TC30 CardiograPHiliphhilip PHiliphhilip ECG Machine
Network Card
About Network Settings
PageWriter TC ECG uses wired or wireless network connection or
modem connection to communicate with various external servers.
Among the network configuration settings available on the
electrocardiograPHiliphhilip, all TCP/IP settings can be specified
according to the needs of your specific clinical environment.
Both automatic IP addressing and fixed IP address setting are
available via DHCP (Dynamic Host Configuration Protocol). The
network settings on the ECG support the TCP/IP protocol using
dynamic IP addresses or static IP addresses, and support DNS or
WINS servers.
The Ethernet data transmission settings can be set to
auto-negotiation, where the system automatically configures the
correct settings for the Ethernet speed and mode (half-duplex or
full-duplex), or can configure fixed settings as needed.
Network connection status window
Tap the LAN icon or wireless LAN icon on the status bar (top of the
screen) to view more detailed information about the connection. The
network connection status window appears.
Item name | PHiliphhilip TC30 ECG machine network card |
Brand | PHiliphhilip |
Model | TC30 |
Use place | Hospital Devices; Medical Care; ICU; Medical Equipments and Accessories |
Deliver time | 3-5 days |
Warranty | 90 days |
The specifications in the following sections are applicable to the
Summit wireless adapters that are offered as options for the
PageWriter TC30 cardiograPHiliphhilip. Two options are available:
Summit SDC-CF20G Wireless Adapter (Option D21)
Length 72.8 mm (2.87 inches)
Width 43 mm (1.69 inches)
Thickness n Card body: 3.3 mm (0.13 inches) n
Antenna: 7.3 mm (0.29 inches)
Weight 21 grams (0.7 ounces)
System Interface 16-bit Compact Flash Type I with 50-pin connector
Antenna 0 dBi gain omnidirectional with diversity
Chipset Broadcom BCM4318E
Input Power Requirements 3.3 VDC +/- 5%
Typical Power Consumption (at maximum transmit power setting) n
Operating Temperature -30 °C to 75 °C (-22°F to 167°F)
Operating Humidity 10 to 90% (non-condensing) Mounting 50-pin
connector Network Standards IEEE 802.11b, 802.11g, 802.11i
Frequency Band 2.4 to 2.4897 GHz Wireless Media n Direct
Sequence-Spread Spectrum (DSSS) n Orthogonal Frequency Divisional
Multiplexing (OFDM) Media Access Protocol Carrier sense multiple
access with collision avoidance (CSMA/CA) Data Rates Supported n
802.11b (DSSS): 1, 2, 5.5, 11 Mbps n 802.11g (OFDM): 6, 9, 12, 18,
24, 36, 48, 54 Mbps
Modulation
1, 6, 9 Mbps: BPSK
2, 12, 18 Mbps: QPSK
5.5, 11 Mbps: CCK
24, 36 Mbps: 16-QAM
48, 54 Mbps: 64-QAM
Regulatory Domain Support n
Operating Channels n
Transmit Power Settings
NOTE: Maximum transmit power will vary according to individual
country regulations. All values nominal, +/-1.5dBm.
Security
Standards
Encryption n
Encryption Key Provisioning n
802.1X Extensible Authentication Protocol Types n
Compliance
ETSI Regulatory Domain n
FCC Regulatory Domain n
TELEC Regulatory Domain n
Summit SDC-CF22AG Wireless Adapter (Option D22)
Length 67 mm (2.64 inches)
Width 43 mm (1.69 inches)
Thickness 5 mm (0.2 inches)
Weight 28 grams (1 ounce)
System Interface 16-bit Compact Flash Type II with 50-pin connector
Antenna 0 dBi gain dual-band omnidirectional with diversity
Chipset Broadcom BCM4318E
Typical Power Consumption (at maximum transmit power setting) n
Operating Temperature -30 °C to 85 °C (-22°F to 185°F)
Operating Humidity 10 to 90% (non-condensing)
Mounting 50-pin connector and standard compact flash rails
Network Standards IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i
Operating Channels n
Security
Standards
Encryption Protocols n
Encryption Key Provisioning (40-bit and 128-bit key lengths) n
802.1X Extensible Authentication Protocol Types n
Compliance
ETSI Regulatory Domain n
FCC Regulatory Domain n