RTV 2 Condensation Cure Liquid Molding Silicone Rubber For Cultured Stone Molds

RTV 2 Condensation Cure Liquid Molding Silicone Rubber For Cultured Stone Molds

RTV 2 mold making rubber is a two-component material, consisting of Part A base silicone and Part B C520 curing agent, cures at room temperature by a condensation reaction. These materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc.

Features of RTV 2 condensation cure liquid molding silicone rubber for cultured stone molds

lGood flow ability and long working time

lMedium hardness

lHigh tear and tensile strength

lEasy de-mould from complex replica parts

lAcid and alkali-resistance

lLow linear shrinkage

TDS of RTV 2 condensation cure liquid molding silicone rubber for cultured stone molds

How to make the silicone mold?

• The surface of the original should be clean and free of loose material. If your products with thin flower patterns, and especially with porous substrates, pls use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

• Mixing

Please weight 100 Part A base and 2 parts of B the Curing Agent in a clean container. Thoroughly stir Part A base silicone before use, as filler separation may occur upon prolonged storage. Mixing Part A and Part B evenly until the curing agent completely dispersed in the base. Hand or mechanical mixing can be used, but do not for an extended period of time or allow the temperature to exceed 35C (95F). Mix suitably small quantities to ensure thorough mixing of base and curing agent.

It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 minutes under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

Pouring the mixture and curing

Pour the mixed Part A base silicone and part B the curing agent as soon as possible onto the original, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Storge of RTV 2 condensation cure liquid molding silicone rubber for cultured stone molds

When stored at or below 30 C(85F) in the original unopened containers, silicone rubber Base and part B the Curing agent have a usable life of 12 months from the date of production. After 12 months stock, pls use the Stir to mixing the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

Certificates

Factory

The information above is just for reference, if you're interesting or have any questions, please don't hesitate to contact Sophie.

Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials.

Our professional approach to all our work, together with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials. We pride ourselves on the different types of mould making materials we offer.

Why Choose Us?

Our Advantages
More than 20 years experience in moldmaking & casting industry
10 years exporting experience

Benefits of MC Silicone
1- A Technology Team: R&D Support
2- A Factory: customize for you in every possible aspect
3- A Sales Team: assist you develop more markets
4- Fast Delivery time about 3-5 working days per order
5- Professional Sales Service, 12-24 hours response
6- Various Payment Method

If you're looking for a good silicone supplier, you've come to the right place. Our unique vision and mission drives us bring the best products and service to each of our clients. We gonna be your guide in silicone industry, we are your partner. Welcome to Join us.