ASME SA 285 / ASTM A285 Grade C Pressure Vessel Carbon Steel Plates
Product Description:
ASME SA 285 / ASTM A285 Grade C Pressure Vessel Carbon Steel Plates
are carbon steel plates used in the fabrication of pressure
vessels.
These carbon steel plates are manufactured according to the
standards set by the American Society of Mechanical Engineers
(ASME) and the American Society for Testing and Materials (ASTM).
The grade C indicates the chemical composition and mechanical
properties of the steel. These plates are designed to withstand the
pressure and temperature conditions encountered in pressure vessel
applications.
The plates are commonly used in industries such as oil and gas,
chemical processing, and power generation. They can be fabricated
and welded to construct pressure vessels, tanks, heat exchangers,
and other equipment.
It's important to note that the specific properties and
requirements of ASME SA 285 / ASTM A285 Grade C Pressure Vessel
Carbon Steel Plates may vary depending on the manufacturer and the
intended application. When using these plates, it is advisable to
refer to the relevant standards and specifications to ensure proper
usage and safety.
Product Name | ASME SA 285 / ASTM A285 Grade C Pressure Vessel Carbon Steel Plates |
Size | as required |
Width | 1000-4500mm or as required |
Thickness | 2mm-150mm |
Standard | ASME/ASTM |
Technique | Hot rolled |
Surface Treatment | According to customer's requirement |
Thickness Tolerance | ±0.01mm~ ±0.25mm |
Material | SA 285 Gr.C |
Application | Fusion welded pressure vessels |
MOQ | 1 ton , We can accept sample order. |
Shipment Time | Within 15-20 workdays after receiving deposit or workable L/C |
Export Packing | Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of
transport,or as required |
Capacity | 250,000 tons/year |
Chemical Composition:
C | Mn | P | S | Si | Cr | Cu | Ni | Mo | Nb | Ti |
% | % | % | % | % | % | % | % | % | % | % |
0.16 | 0.40-1.20 | 0.03 | 0.03 | 0.35 | 0.30 | 0.30 | 0.30 | 0.08 | 0.01 | 0.03 |
Physical properties :
Grade | Tensile strength, kis [MPa] | Yield strength, min, kis [MPa] | Elongation in under [50mm], min, % |
SA285 Gr C | 380-515 | 205 | 27 |
ASTM A285 Gr.c PRESSURE VESSEL PLATES EQUIVALENT GRADES:
ASTM/ASME | ME British Standard | European Norm | Japan | Spain |
A/SA285 - Grade C | 161 Gr.360/164 Gr.360 | P235GH | SPV 24 | A 37 RCI |
Application:
Applications of ASME SA 285 / ASTM A285 Grade C Pressure Vessel
Carbon Steel Plates:
- Pressure vessels: These plates are primarily used in the
fabrication of pressure vessels, such as boilers, tanks, and
reactors, where they can withstand high pressure and temperature
conditions.
- Heat exchangers: They are suitable for constructing heat
exchangers, as they offer good heat transfer properties and
resistance to corrosion.
- Storage tanks: ASME SA 285 / ASTM A285 Grade C Pressure Vessel
Carbon Steel Plates can be utilized in the manufacturing of storage
tanks for liquids and gases.
- Process equipment: These plates are used in the fabrication of
process equipment, including piping, valves, and fittings, in
chemical and petrochemical industries.
- Power generation: They are employed in the construction of
components in power plants, such as steam generators and turbine
casings.
These are just a few examples of the applications of ASME SA 285 /
ASTM A285 Grade C Pressure Vessel Carbon Steel Plates. Their
specific uses may vary depending on the industry and the
requirements of each individual application. Always refer to the
relevant standards and specifications for proper design and usage.
FAQ:
Q1. What are your company's main products ?
A1: Our main products are stainless steel plate/sheet, coil,
round/square pipe, bar, channel, etc.
Q2. How do you control quality ?
A2: Mill Test Certification is supplied with shipment, Third Party
Inspection is available. and we also get ISO,SGS,Alibaba Verified.
Q3. What are the advantages of your company ?
A3: We have many professionals, technical personnel, more
competitive prices and best after-dales service than other
stainless steel companies.
Q4: What is the terms of packing?
A4: generally, we pack our goods in bundles or coils with rods or
belts, we could also pack the goods as the customers requirement.
Q5:What is your delivery time?
A5: For stocks, we could transport the goods to loading port within
7 days after we received your deposit
For production period, it usually takes about 15 days-30 days after
receiving the deposit.
Q6. Can you provide sample ?
A6: We can provide the samll samples in stock for free, as long as
you contact us.
Customized samples will take about 5-7days.
Q7. How many coutries you already exported ?
A7: Exported to more than 50 countries mainly from America, Russia,
UK, Thailand, Vietnam,Kuwait, Egypt, Turkey, Jordan,India, etc.