Thermal Abuse SUS304 220V Battery Test Chambers with Explosion Proof Lock And Chain
Brand Name:DGBELL
Certification:CE/ISO
Model Number:BE-101-1000D
Minimum Order Quantity:1 Set
Delivery Time:Negotiation
Payment Terms:Western Union, T/T, D/P, D/A, L/C
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
No.11 Wusong 1st Street, Dongcheng District, Dongguan 523117, Guangdong, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Battery Thermal Abuse Test Chamber IEC 62133-2017 With Explosion-Proof Lock and Explosion-Proof Chain
Thermal abuse test chamber is suitable for standard
- IEC 62133-2017
- UL 1642
- GB 31241-2014
Main technical parameters
Model | BE-101-1000D |
Structure | Door with explosion-proof lock + explosion-proof chain |
| Temperature range | Room temperature ~ 200 ℃ within the adjustable control |
Control accuracy | ±0.5℃ |
Temperature deviation | ±2.0℃, no load |
| Temperature rise rate | RT ~ 150 ℃ (5 ℃ / min, linear load) Temperature overshoot: ≤2℃ |
Control display | PLC touch (7 inches) + remote control, networkable, cell phone APP alarm device, with USB interface, with R485 interface can be connected to computer control. |
Working cabinet size | W600XD500XH600mm |
External dimensions | W940XD780XH1620mm |
| Inner chamber material | SUS304 stainless steel, mirror finish |
| Outer chamber material | SECC steel plate, fine powder coating coating |
| Bottom | With universal wheels |
Observation window | 390X360mm (20mm thick tempered explosion-proof glass) |
| Power supply voltage | 220V/50HZ |
Heating power | About 12KW |
| Safety protection device | With protection functions such as over-voltage, overheating, over-current and short circuit caused by testers' misoperation Protection of battery electrode positive and negative connection, etc. |
Safety devices | Salt spray discharge system, explosion-proof pressure relief port, alarm light |
The heating test of battery thermal abuse test chamber shall be carried out as follows
1.Relevant Standard Test Requirements
Single battery safety test
The heating test is carried out as follows:
- The single battery is charged according to the method of 6.1.3
- Put the single battery into the temperature chamber.
- For lithium-ion batteries, the temperature chamber is increased from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining the temperature for 30 minutes.
- For nickel metal cyanide batteries, the temperature chamber is raised from room temperature to 85 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.
- Observe for 1h.
2.Battery Module Safety Test
1) The battery module battery shall be charged according to the method in 6.1.4.
2) For lithium-ion batteries, the temperature chamber is raised from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 30 minutes.
3) For nickel metal cyanide batteries, the temperature chamber is raised to 85 ° C ± 2 ° C at room temperature at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.
4) Observe for 1h.
Thermal Abuse SUS304 220V Battery Test Chambers with Explosion Proof Lock And Chain
Inquiry Cart
0