Home /Measuring & Analysing Instrument Design Services /

Online RS485 Interface Dissolved Oxygen Meter For Water Quality Monitoring

Online RS485 Interface Dissolved Oxygen Meter For Water Quality Monitoring

Brand Name:Daruifuno
Certification:CE, ISO
Model Number:DUC2-DO-H-A
Minimum Order Quantity:1
Delivery Time:5-25 days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Suzhou China
Address: Suzhou Xupai Road No.3
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details


Online RS485 Interface Dissolved Oxygen Meter For Water Quality Monitoring


Dissolved oxygen, Usually recorded as DO. Expressed in milligrams of oxygen per liter of water, mg/L.

The content of dissolved oxygen in water is closely related to the partial pressure of oxygen in the air and the temperature of water. The lower the water temperature, the higher the dissolved oxygen content in the water.


Dissolved oxygen value is a basis for studying the self-purification ability of water. The dissolved oxygen in the water is consumed, and it takes a short time to restore to the initial state, indicating that the water body has strong self-purification ability, or the water body is not seriously polluted. Otherwise, it means that the water body is seriously polluted, the self-purification ability is weak, or even loses the self-purification ability.


Specification:

ModelDUC2-DO-H-A
Software VersionDRFN DO Analysis software V1.0
Sensor InputCompatible with all DRFN's DO Digital Sensors
Display RangeDO ConcentrationDO concentration 0-50mg/L (or ppm), unit can be switched
Saturation0-400%
TEMP-10~500℃ /14~932℉
Atmospheric Pressure30-120kpa
ResolutionDO Concentration0.01 mg/L(or ppm)
Saturation1%
TEMP0.1℃/ 0.1℉
Salinity Compensation RangeInput range 0.0001-99999ppt
Relay Control2 settable SPST relays with a maximum load of 3A/250VAC
Analog Current Output2 settable 0/4~20mA current outputs, max load 1000Ω
Communication Method

RS485 interface
MODBUS RTU
support JSON text data format

OTA——
Display Screen128*64 LCD, adjustable backlight mode, adjustable display rate
Configuration InformationPower off protection, parameters are retained indefinitely
Time/Data Record

Record 14000 historical data
Record interval can be set between 1~999 minutes

Maintenance RecordsLast 100
Operating Temperature0~60℃,RH<95% ( no condensation)
Storage Temperature-20~70℃, RH<55% ( no condensation, precision instruments)
Shell MaterialEnhanced ABS
Protection GradeIP66
Dimension144*144*120 mm
Mounting MethodWall mounting, pipe clamping, panel (hole size 138*138 mm)
Electrical InterfaceThe back end reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm
Power Supply100~240VAC
Power ConsumptionAbout 7W
WeightAbout 800g


Please click the user manual of DO controller here:

DUC2-DO User Manual.pdf


Brief introduction:

● Compatible with DRFN digital dissolved oxygen sensors including fluorescence and polarography;
● Automatic compensation for air pressure display;
● The working status of the sensor can be queried, including reading the serial number;
● OTA download technology as a smart configuration option for the instrument;
● Time and historical data recording function;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● IP66 waterproof level, sealed enclosure can isolate pollution and corrosive gas;
● Support a variety of installation methods


Aplication:
◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquarium


FAQ
1. Which sensors can be connected to your dissolved oxygen controller?

A: The dissolved oxygen meter can be compatible with DRFN digital dissolved oxygen sensors including fluorescence and polarography.


2. How does your DO controller collect sensor data?
A: The connected sensor uploads the detected data in a special encrypted communication method to ensure that the DUC controller can collect high-precision data more stably


3. What are the applications of dissolved oxygen analyzers?
A: Sewage/Surface water monitoring/Aquaculture water bodies/Urban sewage treatment/Industrial wastewater treatment /Aquariums


4.Can the dissolved oxygen controller realize the automatic cleaning control functi​on?
The DO controller has a self-cleaning control function, and Our DO sensor has a cleaning interface.
The end customer can choose water or air, Realize automatic cleaning. But the end user need to buy a solenoid valve himself.


5. Does the dissolved oxygen controller have an ambient temperature alarm function?
Our DO controller has ambient temperature alarm function


6: How long will you give me the reply?
A: We can support you 24Hours online service via email, skype, what’sapp, facebook etc within 1 hour.


7: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock. or it is 7 days if the goods are not in stock, it is according to quantity.


8: Do you provide samples ? is it free or extra ?
A: NO, we could not offer the sample for free charge

9: What is your terms of payment ?
A: Payment<8000USD, 100% in advance. Payment>=8000USD, 30% T/T in advance ,balance before shippment.

China Online RS485 Interface Dissolved Oxygen Meter For Water Quality Monitoring supplier

Online RS485 Interface Dissolved Oxygen Meter For Water Quality Monitoring

Inquiry Cart 0