Add to Cart
IEC60335-2-3 Electric Iron Drop Tester Electrical Appliance Tester
Technical parameters:
| Power supply | AC 220V 50HZ | 
| Drive mode | Motor and CAM drive | 
| Test times | 1~9999 display,preset | 
| Working speed | ≤20 turn/min | 
| Height of fall | 40㎜ | 
| Supporting steel plate | thickness>15㎜,quality>15kg | 
| Size | 500*520*980mm | 
Product information:
To check the mechanical strength of electric irons by repeated drop
onto a steel plate according to IEC60335-2-3 clause 21.101.
The electric iron is operated under normal operation at rated power
input and, except for cordless irons; the soleplate temperature is
maintained under these conditions throughout the test.
Standard Outfit:
1 steel plate, at least 15mm thick, mass at least 15 kg, rigidly
supported,
1 lifting device with radial cam for a slow lifting of the specimen
for 40 mm, for a sudden release for a free fall and for a rest time
on the steel plate of ≈15% of the test duration,
1 gear motor, to drive the lifting device, for 20 drops per minute
maximum,
1 falling assembly, with tie-bar for fastening the specimen, with 1
pair of distance pieces 40 mm.
1 switchgear, with main switch, fuses and preset counter to switch
off the unit after the preset number of strokes.
