I25X 420V series surge protectors protect against surges affected by Level 1 lightning protection

Brand Name:Uchi
Certification:CE / SGS / ISO9001
Model Number:OBV-SPD-420V
Minimum Order Quantity:200 piece
Delivery Time:5-15 days after payment
Payment Terms:T/T, L/C, Western Union
Contact Now

Add to Cart

Active Member
Location: Dongguan China
Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.
Supplier`s last login times: within 14 hours
Product Details Company Profile
Product Details

II20X 375V series surge protectors protect against surges affected by indirect lightning and direct lightning

The main technical parameters
Model and specification U1-II20X

Uc(VAC)Maxi continuous operating voltage275, 385,420,440 Vac
Up(kV)Voltage protective level2.5kV
(8/20μs)Imax(kA)Maxi discharging current50kA
(8/20μs)In(kA)Nominal discharging current25kA
response time≤25ns
Signal deterioration indicationoff-work;on-replace
Housing MaterialRed thermoplastic material
Housing self-extinguishing classUL94_V0
Temperature range-40℃+80℃
humidity range5%95%
Elevational≤3000m
Method of connecting wiremultiple(Connect In Parallel )
Thread Dimensions1.5mm235mm2
Mounting method35mm standard rail installation
IP(degree of protection of enclosure)IP20



Product Features:
combination type SPD
The smallest size single phase surge protector of Iimp: 50KA ;
only 27mm width, save space;
Sealed metal air gap technology,high energy electronic trigger discharge gap, with the ability to block continuous flow
Low output residual;
fast response time (≤25ns);

Installation
◆ The product is installed at the junction of LpZ0A or PLZ0B and PLZ1 area.or installed on the 35mm standard rail at the main distribution box(cabinet) of the power supply. The connecting rall adopts a 6-35mm² multi-strand copper cord.
◆The grounding wire should be a two-color wire of 16mm² or more, and the length is not more than 500mm.
◆In order to prevent the safety of the grid from being affected after the failure of the eddy current protector,a protective HDSCB backup protector should be connected in series with the protection.

Main structure and working principle
◆ spD is a-port, anti-shock protection, indoor fixed installation, voltage limited type.
◆With high impact current (imp: 15kA). Features such as low residual pressure (Up: ≤ 1.5kV). SPD has a built-in disconnector, When the SPD fails due to overheating and breakdown. the disconnector can automaticaly disconnect it from the arid. At the same time, an indication signal is given. ◆The visible window displays white when the SPD is working normally, and displays red after falilure and separation.

The combination type SPD characteristics:
HDU1-125X series Surge protector device (hereinafter referred to as SPD) is applicable to TT.TN-S,TN-
C, IT,TN-CS and other power supply systems for AC 50/60Hz,380V and below,for lightning strikes or
other transient overvoltages.Protection is applied to the first-level lightning protection of
equipment systems in areas with high risk of lightning strikes.The SPD complies with GB/T18802.1/
.IEC61643-Il





















China I25X 420V  series surge protectors protect against surges affected by Level 1 lightning protection supplier

I25X 420V series surge protectors protect against surges affected by Level 1 lightning protection

Inquiry Cart 0