Wires Flattening And Gluing Brad Nail Making Machine Hydraulic Pressure high quality made in china nail atuomatic nail making machine

Wires Flattening And Gluing Line Hydraulic Pressure Brad Nail Making Machine Nail Production Macchine Made In China High Quality

Brad Nail Making Machine Of 100Wires flattening and gluing line staples forming machine steel atuomatic nail making machine

Product Description

1. Description of Brad Nail Making Machine Of 100Wires flattening and gluing line type staples forming machine made in china high quality automatic nail making machine.

The automatic nail making machine is composed of 100 round wire pay off machine(offered by client, wires are loading on 1000mm spools), two rollers type flattening machine, wire banding part, two wheels type traction machine, wire band guiding device, two take-up machine for no stop running. The normal running speed is about 13-16m/min. It could control by PLC.

Advantage:

1) The stop mode is deceleration stop.

2) Adjust torque strength (special use, general default value)

1)100sets Active type pay-off for spools with wire loading made in china:

2)Two rollers type flattening device made in china:

Two pc hard alloy steel made flattening rollers are used to roll round steel wire into flattening wire. The two rollers size is Φ200*192mm, hardness of roller is HRC61-65, the running of two rollers is driven by 12KW motor . The rolling tolerance of flattening wire is about ±0.012mm.

3)100wires type wire banding device

100Wires type wire banding device is same as normal type, there have straighten and flat regulation rollers both in front and back to straight the wire(the inlet side is 8 pairs of rollers, the outlet side is 4pairs of rollers). The flatten machine wire will be combined together through three times of gluing and baking. The glue will be filled onto wires automatically, the whole circle type induction heating coils will bake the wire automatically; when need to produce stainless steel strip, hot air blowing type baking will be used.

For environment protection requirements, some banding line are fixed with sealed cover and sucking blower in the bottom to get the glue steam out of workshop for special treatment before discharge. Blower power 1.1KW, totally have 10pcs blowers.

4)Two wheels S type traction device

TwoΦ600mm*200mm traction wheels are formed in "S" shape to keep 100wires in straightness during gluing. Both wheels are driven together by one motor plus gearbox in the middle, motor power is 7.5KW. Wire band will go to the bottom of further wheel first, then go to the bottom of near wheel, then wire band go outlet from the top of near wheel to next step.

5)Wire band guiding device

One group small steel rollers, one pair of big white nylon rollers used for straightening and guiding of wire band before take-up. Drive motor power is 5.6KW. It could be operated so conveniently.

6)Two wire band Take-up

Two sets of wire band take-up are used at end of whole line to ensure no stop running. Each take-up is driven by 2.21KW motor. Each take-up can load about 500-610kgs wire band coils according to requirements.

4. Packaging & Shipping

We can pack it by pallet, or according to the customers' specific requirements.

Port: Shanghai/Ningbo...

5. Our Services

In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Remove simple proble

(4) Support you on line by internet.

(5) Training how to install the machine, training how to use the machine.

(6)Engineers abailable to service machinery overseas.

FAQ:

Q:Where is your factory located?
A: Our factory is located in Hangzhou city, Zhejiang Province of China. The nearest airport is Xiaoshan airport or Shanghai airport. We can pick you up from these airport.

Q: How many years are your company engaged in the wire mesh machines?
A: More than 20 years. We have our own technology develop department and testing department.

Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.

Q: What's the guarantee time for your machines?
A: Our guarantee time is 1 years since the machine was installed in your factory.

Q: Can you export and supply the customs clearance documents we need?
A: We have so many experience for exporting. And we can supply the Form E, certificate of origin etc, your customs clearance will be no problem.
If you are interested in our machines,
please contact us now,
We will provide you with professional and reasonable solutions.

All the products of our company have already been widely used in metal products area.

Any doubt Please contact us.

Hangzhou Suntech Machinery Co.,Ltd. which is engaged in supplying machines for metal products and industrial automatic equipment, is a high-tech enterprise of Zhejiang province. Our powerful professional researching team has imported, digested and absorbed the most advanced technology of equipment over the world.
　　We deal with many types of machines for metal industry(wire&tube), such as straight wire drawing machine, headstand wire drawing machine, plating production line, pre-tension equipment for wire rope, wire rope coating and plastic-filling equipment group, galvanizing line, annealing furnace, welding electrode and wire production line, and various metal pipe and tube machinery. All have fully entered into the fields of ferrous metal products (high, middle, low carbon) and non-ferrous metal products(stainless steel, niobium, tantalum, copper and so on). Our machines have already been exported to many countries and got high recognition.
　　Bearing with faith ”integrity, cooperation and mutual benefits”, we are looking forward to enjoy sincerely cooperation with more and more friends over the world