

Add to Cart
Drainage solenoid valve Two-way normally closed two-position press Solenoid switch / Water Solenoid Valve
Description
Solenoid valve is a two-way normally closed two-position two-way
solenoid valve. The valve uses the electromagnetic force generated
by the coil to drive the movement of the valve core, thereby
blocking or circulating the medium in the pipeline, and achieving
the purpose of timing and automatic discharge of compressed air
condensate. Mainly used in compressed air system components such as
filters, separators, dryers, air storage tanks, drip feet, etc. The
discharge time and interval can be adjusted according to different
needs
Image
Specification
medium: water Medium temperature: -20~80°C Work pressure: 0~16bar Aperture (mm): 3.0 Intervals: 0.5~45min Discharge time: 0.5~10sec Joint form: G1/2” (can be changed to 3/8” or 1/4”) |
Application
1. Before installation, remove dirt, copper filings, rust, etc.
from the compressed air system. It is recommended to install the
electronic drain valve after the full pressure drop system is
emptied for 1 minute;
2. The solenoid valve should be installed vertically on the
horizontal pipeline, the flow direction of the medium must be
consistent with the arrow direction pointed by the solenoid valve,
and the water outlet should not use a hose that is not resistant to
airflow;
3. The input voltage of the coil must be consistent with the
voltage indicated on the coil, and it is never allowed to remove
the solenoid from the valve when it is energized to prevent the
coil from being burned;
4. When using direct current, the positive pole must be connected
to connector "1".
Contact US
Xi'an Yunyi Instrument Co., Ltd
E-mail: judy@369yb.com
Phone/WhatsApp:0086 17602903009
Add.: Room B11003, 10th Floor, Sihai Center, No. 424, Taihua
North Road, Weiyang District, Xi'an 710021, Shaanxi,China