708-2L-45240 Main Pump Seal Ring For PC210-10 PC210LC-10 Komatsu Inner Parts

708-2L-45240 Main Pump Seal Ring For PC210-10 PC210LC-10 Komatsu Inner Parts

Hydraulic Seal Installation Requirements:

1. The sealing surface of hydraulic seal gasket and flange should be clean.

2. The outer diameter of the hydraulic seal gasket should be smaller than the flange sealing surface, and the inner diameter should be slightly larger than the pipe inner diameter.

3. The pretension of the gasket shall not exceed the design requirements.

4. Torque wrenches are best used when packing asbestos gaskets.

5. When installing the gasket, tighten the nuts one by one.

6. In case of leakage, step-down treatment must be carried out after installation, and the sealing gasket must be replaced or adjusted.

Storage Precautions:

When storing seals, please pay attention to the following items:

1. Do not open the seal package when it is not necessary, otherwise dust will stick to the seal or scratch the seal.

2. Store in a cool place, not in direct sunlight. Ultraviolet rays and water vapor will accelerate the deterioration and dimensional changes of rubber and plastics.

3. When storing unpackaged products, be careful not to stick or pack impurities and store them in their original state. Nylon should be sealed tightly to prevent dimensional changes.

4. Do not place the seals close to heat sources, such as boilers, furnaces, etc. The heat will accelerate the aging of the seals.

5. Do not place the seal near the motor or where ozone is generated.

6. Do not hang the seal with needles, iron wire or rope, otherwise it will deform the seal and damage the lip.

7. The surface of the seal sometimes has color changes or white powder (blooming phenomenon), which will not affect the performance of the seal.

Related Parts:

Product Show:

• Guangzhou Suncar Seals Co., Ltd. is a foreign trade company specializing in construction machinery seals. Suncar has a complete management center, professional product consulting services, innovative research and development of product production, efficient logistics and distribution and other organizational structures. At present, the company's business covers many regions at home and abroad.

• Suncar Seals entered the construction machinery oil seal industry in 2008 and has nearly 12 years of oil seal technology experience. Suncar Seals has always maintained its core technology advantages, advanced manufacturing and processing capabilities, scientific management system and complete after-sales system. It is recognized as one of the most promising companies in China's future mechanical oil seal business.

• Suncar Seals has a wealth of experience in production and processing and a good production environment. Product is used for excavators, bulldozers and wheel loaders of Komatsu, C.A.T, JCB, Hitachi, Sumitomo, Kobelco, SUNCARVO.L.VO, KATO, Daewoo, CASE, John Deere and other brands.

• Suncar Seals company provide construction machinery equipment such as loaders and crawler excavators provide high-quality, high-performance, long-life seals and vehicle parts, which solves the problem of maintenance and replacement of construction machinery parts for customers. Relying on its good reputation in the machinery industry, SUNCAR will always maintain its original intention, actively develop and create a unique brand belonging to the company, and provide customers with high-quality products at lower costs, better quality and good service.