Add to Cart
Conical Twin Screw Extruder / Twin Screw Extruder China / PVC Twin Screw Extruder
Conical Twin Screw Extruder / Twin Screw Extruder China / PVC Twin Screw Extruder Configuration list
Note: This table as attached file which is for selection of the configuration on the extruder.
SN | Items | Choosing configuration |
1 | Production control system | Siemens PLC control system |
2 | Cooling system of the main control electric box | Fan cooling |
3 | Main motor | AC motor with ABB inverter |
4 | Core temperature adjustment control | Internal closed loop heat balancing system. |
5 | Material of screw & barrel type | Nitrided Alloy with bi-metal in two parts |
6 | Quantitative feeding system’s mixing function | Standard dosing device in twin screw type. |
Conical Twin Screw Extruder / Twin Screw Extruder China / PVC Twin Screw Extruder Circumstances condition
SN | Condition | Specification | Description |
1 | Natural circumstance condition | Working place | Indoor use |
Power source | No dangerous area | ||
Humidity | 85% no condensation | ||
Temperature | 0~40 ℃ | ||
2 | Electricity source | Installation capacity | 90 kW |
Power supply | 3P+N+PE | ||
Voltage/Frequency | 380V/50Hz other can be option | ||
3 | Cooling water | Temperature | ≤15 ℃ |
Water pressure | ≥0.3MPa | ||
Flow | ~15 m3/h | ||
4 | Air condition | Compressor air pressure | ≥0.6MPa |
Flow | ~0.9 m3/min |
Conical Twin Screw Extruder / Twin Screw Extruder China / PVC Twin Screw Extruder Main specification
SN | Parts name | Specification | Description |
1 | Extruder | Extruder model | HYZS-65/132 conic twin screw |
Output | 250-350kg/h | ||
Center height | 1000mm | ||
Weight | 3100kg | ||
2 | Screw | Diameter | Ø65/132 mm |
Material | 38CrMoAlA + special alloy | ||
Finish | Nitrogen-filled (0.50~0.70mm depth) and polish | ||
Rotate speed | 0~38 r/min | ||
Core of the screw | Auto control for temperature | ||
3 | Barrel | Material | 38CrMoAlA with bi-metal type |
Inside finish | Nitrogen-filled (0.50~0.70mm depth) and rubbing | ||
Heating control area | 4 zones | ||
Heating way | Cast aluminum/ ceramics | ||
Heating power | 20 kW | ||
Cooling system | Low-noisy barrel cooling fan | ||
Cooling power | 0.3kwx3 sets | ||
4 | Gear box | Housing material | Ductile iron QT-500 |
Gear material | 20CrMnTi | ||
Gear surface | Hardened and ground in high precision | ||
Axis material | 40Cr | ||
Conical Twin Screw Extruder / Twin Screw Extruder China / PVC Twin
Screw Extruder Picture