Sheet Extruder Machine / PPR PE Pipe Extruder Machine SJ80/33

Sheet Extruder Machine / PPR PE Pipe Extruder Machine SJ80/33

Sheet Extruder Machine / PPR PE Pipe Extruder Machine HYPET Special features except the same features with other supplier.

a. The length-to-diameter ratio is 33-38:1, which can more effectively plasticize the material
b. The specially designed screw can better adapt to the characteristics of PE and PPR
c. The special feed design can increase the output and control different output requirements.
d. The bimetal barrel can double the service life

Sheet Extruder Machine / PPR PE Pipe Extruder Machine Configuration list

Note: This table as attached file which is for selection of the configuration on the extruder.

Sheet Extruder Machine / PPR PE Pipe Extruder Machine​ Condition of use

1. Sheet Extruder Machine / PPR PE Pipe Extruder Machine​ Technical features of whole line

2. Sheet Extruder Machine / PPR PE Pipe Extruder Machine​ Circumstances condition

Sheet Extruder Machine / PPR PE Pipe Extruder Machine Main specification:

Sheet Extruder Machine / PPR PE Pipe Extruder Machine Picture:

Sheet Extruder Machine / PPR PE Pipe Extruder Machine Terms & conditions

1. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Training and services

1) Instruction of field installation

2) Equipment field debugging and trial run if required by the buyer according to the rule.

3) Training on field operation and maintenance for customer's personnel.

4) Provide technical consultation service on long-term basis.

2. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Installation and debugging

When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.

2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.

3) This Price does not included commission and installation in buyer’s factory.

3. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Terms of payment

1) T/T and L/C (irrevocable, at sight) both are acceptable.

2) 35% of the total contract value should be paid in advance, balance 65% of the total value is to be paid before shipping at the Seller’s factory.

4. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Time of delivery

1) When the contract becomes valid, the machine should be delivered within 30 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.

2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.

5. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Debugging charge

The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (80USD/day).

6. Sheet Extruder Machine / PPR PE Pipe Extruder Machine Guarantee clause

1) Guarantee is 1 year (excluding human factor and wearing parts).

2) Under proper working conditions, 12 months from the date of completion of commissioning at the buyer's site, and should be at the latest within 14 months from the issuing date of Bill of Lading.

Located in Shenzhen City which is the most lively and youngest top city in China, it's next to HongKong and Guangzhou City.

Shenzhen HYPET founded in 2002, and it inherits from China national extrusion machinery entrerprise. Base on Germany and Italian technology, HYPET invented and manufacture unique gear box with own patent. For these reason to keep HYPET tech and machine quality priority in extrusion machine field.

The first block type DIY plastic extruder solves the machine agents' many problem. They can easily get extruder parts from HYPET factory then assembles them in their own workshop via the installation video.

The plastic extrusion line core part is the extruder. If the extruder is good, then the line 70% is good. So HYPET offer the service to match local downstream or old downstream service.

Shenzhen HYPET machine is focus on top quality but best enconomic price. Our main plastic extrusion machine includes but not limited PVC / HDPE / PPR pipes extrusion production line, PVC and WPC all type of profiles (PVC window, ceiling, wallpanel, decking, gutter, duct...) production line, PVC plastic marble sheet line, SPC floor production line, WPC door plant, PVC foam board line, Nonweave melt blown fabric line.....

HYPET also offer the special PVC processing aid to decrease your final product cost and increase the product quaity & better shining surface.

We have a full technical team can help you design, manufacture, assemble, inspect and test the plastic machine ass your request.