Plastic Crusher Machine 2HP To 100HP For Recycling

Plastic Crusher Machine from 2HP to 100HP for recycling

Plastic Crusher Machine from 2HP to 100HP for recycling Main model:
HSC-2 2HP
HSC-5 5HP
HSC-10 10HP
HSC-15 15HP
HSC-20 20HP
HYSC-30 30HP
HSC-40 40HP
HSC-50 50HP
HSC-75 75HP
HSC-100 100HP

Plastic Crusher Machine from 2HP to 100HP for recycling Condition of use:
It can be used for various recycling plastic parts.
It is cooled by water for working continuously
Power supply: 380V/three phases, 50Hz

Plastic Crusher Machine from 2HP to 100HP for recycling Features:

• HYPET Intensive granulator is used to crush different types of both soft and hard materials into granulate for recycling, thus enhancing the using rate of plastic materials.
• All structure is made by steel. Substantial and durable, it won’t affect by uncrushed residual plastic keep efficiency.
• Can bear a heavy load, prevent oil leakages and noise, no vibration during processing and make sure products not polluted by oil.
• Equipped with motor overload protection and safety protection for cleaning blade.
• Special claw blade structure with scissors function. High quality blade can chip all soft/hard material easily.
• The length of blade can be adjusted. The life span of blade is long and the blade can be sharpened up and reused.
• Separate designed hopper and granulating chamber can be dismantled easily, while large equipped with shock-absorber for maintaining stability during work.
• The blade materials are imported from Japan, with long life.

Plastic Crusher Machine from 2HP to 100HP for recycling Terms & conditions
1. Plastic Crusher Machine from 2HP to 100HP for recycling Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.

2. Plastic Crusher Machine from 2HP to 100HP for recycling Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.
3) This Price does not included commission and installation in buyer’s factory.

3.Plastic Crusher Machine from 2HP to 100HP for recycling Pricing
1) The above mentioned quotation is valid within 30 days counted from the issue date of quotation.
2) The price and machinery configuration should be updated and confirmed by the Seller in the case that the quotation has been beyond the validity period.
3) The above mentioned quotation is based on Ex works. Sea transportation and wooden case packing is excluded.
4) The price does not cover the cost of testing material. The testing material will be supplied by the Buyer. Or the Seller will purchase the material as requested by the Buyer at Buyer's cost.
5) The price does not include the cost of commissioning at Buyer's site.
The Seller reserves the right to modify the specification and design of the machine in order to enhance the product quality.

4. Plastic Crusher Machine from 2HP to 100HP for recycling Terms of payment
1) T/T and L/C (irrevocable, at sight) both are acceptable.
2) 35% of the total contract value should be paid in advance, balance 65% of the total value is to be paid before shipping at the Seller’s factory.

5. Plastic Crusher Machine from 2HP to 100HP for recycling Time of delivery
1) When the contract becomes valid, the machine should be delivered within 60 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.

6. Plastic Crusher Machine from 2HP to 100HP for recycling Debugging charge
The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (80USD/day).

7. Plastic Crusher Machine from 2HP to 100HP for recycling Guarantee clause
1) Guarantee is 1 year (excluding human factor and wearing parts).
2) Under proper working conditions, 12 months from the date of completion of commissioning at the buyer's site, and should be at the latest within 14 months from the issuing date of Bill of Lading.

Located in Shenzhen City which is the most lively and youngest top city in China, it's next to HongKong and Guangzhou City.

Shenzhen HYPET founded in 2002, and it inherits from China national extrusion machinery entrerprise. Base on Germany and Italian technology, HYPET invented and manufacture unique gear box with own patent. For these reason to keep HYPET tech and machine quality priority in extrusion machine field.

The first block type DIY plastic extruder solves the machine agents' many problem. They can easily get extruder parts from HYPET factory then assembles them in their own workshop via the installation video.

The plastic extrusion line core part is the extruder. If the extruder is good, then the line 70% is good. So HYPET offer the service to match local downstream or old downstream service.

Shenzhen HYPET machine is focus on top quality but best enconomic price. Our main plastic extrusion machine includes but not limited PVC / HDPE / PPR pipes extrusion production line, PVC and WPC all type of profiles (PVC window, ceiling, wallpanel, decking, gutter, duct...) production line, PVC plastic marble sheet line, SPC floor production line, WPC door plant, PVC foam board line, Nonweave melt blown fabric line.....

HYPET also offer the special PVC processing aid to decrease your final product cost and increase the product quaity & better shining surface.

We have a full technical team can help you design, manufacture, assemble, inspect and test the plastic machine ass your request.