Belt Steel 220v Conveyor Carrier Roller For Crashing Plant Coal Mining
Brand Name:QINYI
Certification:CE / ISO / FDA / SGS / TUV
Model Number:Conveyor Carrier Roller
Minimum Order Quantity:10ton
Delivery Time:10~15 days
Payment Terms:L/C, D/A, D/P, Western Union
Contact Now
Add to Cart
Active Member
Location:
Qingdao Hongkong China
Address:
No. 30 Hongkong Middle Road, Qingdao City, China
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
Belt Conveyor Steel Carrier Roller For Crashing Plant Coal Mining
The roller is an important part of the belt conveyor. There are many types and large quantities. The function is to support the belt, reduce the running resistance of the belt, and make the verticality of the belt not exceed a certain limit to ensure the smooth running of the belt.
idlers are classified into self-aligning idlers, buffer idlers, trough idlers, and parallel idlers according to their uses. The function of the self-aligning roller is to correct the deviation of the belt conveyor. Usually, a rotary groove-shaped self-aligning roller is installed on the heavy-duty section of the conveyor, and a parallel self-aligning roller is installed on the no-load section. The buffer roller is applied to the tailstock of the machine according to the actual situation. When receiving the material, it can reduce the impact of the material on the belt, which is beneficial to the service life of the long belt. The trough-shaped roller is generally composed of two side rollers and a flat roller. The groove angle is generally 30 degrees. For a detachable belt conveyor, the three rollers of the trough-shaped roller are hinged to each other, so Called hinged roller. The parallel roller is generally a long roller, which is installed at the lower end under pressure, so it is called the lower roller.
Product introduction
| Material | steel, nylon, stainless steel, PVC, UHMWPE, HDPE |
| Bearing Model | 6204,6205,6305,6306,6307,6308 |
| Bearing Brand | HRB, LYC, ZWZ,SKF, NSK,C&U |
| Working Life | ≥30000 hours |
| Roller Pipe | Q235/carbon steel |
| Diameter | 89/102/108/114/127/133/140/152/159/165/178/194/219 |
| Length(mm) | 190mm-3500mm(National and non-standard idlers) |
| Belt Width | B450mm to B2200mm |
| Seal | Multiple labyrinth seal, water proof, dust proof |
| Standard | GB/CEMA/JIS/DIN/Australia |
| Special | can be customized according to customer or design for customer |
| Supply Ability | 1000pcs per day |
| Certificate | ISO9001,SGS |
| Application | recycling industry |
| power industry | |
| parcel transport industry | |
| petro industry | |
| coal mining industry | |
| cement concrete industry | |
| machining industry |
Pay attention to the following points when maintaining the roller:
1. In the normal use of the roller, the collision to the roller
should be minimized, and it should not be disassembled and
assembled at will.
2. For the replacement of labyrinth seals, the original
factory-designated accessories should be used, and they should be
classified and loaded according to requirements. They should not be
used chaotically to avoid the failure of normal operation after
assembly of different specifications.
3. When replacing the bearing, the opening of the bearing cage
should be facing outwards, and a certain gap should be left after
the bearing is installed into the roller, so that it cannot be
crushed.
4. When resting, the idler can be removed to avoid deformation
caused by extended time of bearing pressure, which will affect the
use effect.
5. After the work is over, clean the roller with a special cleaning
agent, and place the washed roller in a cool and ventilated place,
and continue to use it after air-drying.
6. Items such as protective film can be used to wrap the rollers
that need to be temporarily stored to prevent contamination.
Belt Steel 220v Conveyor Carrier Roller For Crashing Plant Coal Mining
Inquiry Cart
0