Low Speed Dental Implant Contra Angle Handpiece Push Button Chuch Type

Dorit Low Speed Dental Implant Contra Angle Handpiece with Ce​

Dental Implant Handpieces Tech data:

Dental Implant Handpieces Features:

20: 1 gear ratio
Available for various E type motors in accordance with ISO standard
Compatible with all E-type motors (NSK, Aseptico, W&H Nouvag, Acteon)
Dental handpieces right use way:
1. The need to use a clean , dry , oil-free air compressors for medical use ;
2. The air pressure between 2.3-2.8kgf / cm2;
3. Place the adapter with quick connector at the bottom of a combination of dental handpieces , and confirm that the card lock fixed ;
4. Press the pedal , handpiece operation and examine whether the normal operation of the spray head . If everything is normal, you can start using the handpiece.
After each patient use , maintenance should be done as follows
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate ;
2. Use a metal needle to clean the spray holes and fumaroles ;
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle.
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) ;
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom ;
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) ;
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain ;
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization.

Henan Dorit Biotechnology Co., Ltd. always takes “quality bearing responsibility, technology creating advantage, innovation leading the future ” as its development concept, and conscientiously implements to the operation, management, product research and development and manufacture.

During the process of serving global oral industry , Dorit takes every step as walking on the thin ice. We not only innovate bravely, but also go ahead steady step by step.

Dorit keeps on moving ahead and exploring on products, consistently insists on taking humanized and costeffective products as the motivity and basement of the development. At the early stage of Dorit development, we aim on research and development and the sale of high and low speed dental handpieces.

In the middle stage of the development, we mainly concern to the innovation and optimization of the products. The final target is to provide intellectualized service to the oral industry of the world. During this development, Dorit will constantly introduces and taps the talents, integrates the relative industries’ resources to serve and feed back to the society better .