IC695CPE305 GE Perform Real Time Control Of Machines Processes And Material Handing Systems
Brand Name:GE
Certification:CO
Model Number:IC695CPE305
Minimum Order Quantity:1pc
Delivery Time:5-8 work days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Xiamen Fujian China
Address:
Unit 1602, Top Plaza, No.2 Lujiang Road, Siming District, Xiamen Fujian China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
IC695CPE305 GE Perform Real Time Control Of Machines Processes And Material Handing Systems
Product Details:
| Brand Name | GE |
| Model | IC695CPE305 |
| Catalog | IC695 |
| Origin | United States (USA) |
| Dimension | 16*16*12cm |
| Weight | 1kg |
| HS Code | 8537101190 |
| Payment | T/T |
| Sales Price | $3500 |
| Warranty | 12 months |
| Lead time | 3-5 work days |
Additional Information:
| RDSD Switches | Function | |
| Start pushbutton | Pressing this switch initiates RDSD data transfer. (The three-position switch must be set to Upload or Download.) | |
| Three-position switch | Enables/disables RDSD data transfer and selects the direction of data transfer. | |
| Upload | Loads application from CPU to RDSD. | |
| Off | Disables RDSD data transfer. | |
| Download | Stores application from RDSD to CPU. | |
| Run Mode Switch | A three-position switch which operates as follows: | |
| Switch Position | CPU and Sweep Mode | Memory Protection |
| Run I/O Enable | The CPU runs with I/O sweep enabled. | User program memory is read only. |
| Run Output Disable | The CPU runs with outputs disabled. | User program memory is read only. |
| Stop | The CPU is not allowed to go into Run mode. | User program memory can be written. |
Description:
The PACSystems RX3i CPE305 can be used to perform real time control of machines, processes, and material handling systems.
The CPU communicates with the programmer via the internal Ethernet port or a serial port. It communicates with I/O and Intelligent Option modules over a dual PCI/Serial backplane.
The CPE305 is shipped with a real time clock (RTC) battery (IC690ACC001) installed, with a pull-tab on the battery. The pull tab should be removed before installing the CPE305.
The embedded Ethernet interface supports communications with the Machine Edition programming software using the proprietary SRTP protocol. The CPE305 CPU provides two SRTP server connections.
The embedded Ethernet interface has one RJ-45 Ethernet port that automatically senses the data rate (10 Mbps or 100 Mbps), duplex status (half or full duplex), and cabling arrangement (straight through or crossover) of the attached link.
Datasheet Link:GE IC695CPE305.pdf
IC695CPE305 GE Perform Real Time Control Of Machines Processes And Material Handing Systems
Inquiry Cart
0