Lightweight Mini Shore A Durometer Gauge Shore Durometer 0.1HA Resolution

Lightweight Mini Shore A Durometer Gauge Shore Durometer 0.1HA Resolution

High Quality Light Weight Mini Size Shore A Hardness Tester & Shore Durometer

Technical Parameters

Installation

(1) The test stand should be placed on a stable and horizontal table, and then adjust the height of the cross arm. Right during operation
Loosen the bakelite star-shaped handle with your hand, and lift the cross arm with your left hand to make the bottom of the stiffness gauge mounting rod about 110mm away from the round platform. Tighten the bakelite star handle (the hardness tester mounting rod should be aligned with the center of the round platform).
(2) Unscrew the dust cap on the upper end of the hardness tester, and then screw the hardness tester into the mounting rod of the test frame and tighten it (do not use excessive force when tightening, otherwise it will damage the hardness tester). If the surface of the gauge is not aligned with the operator, you can loosen the azimuth adjustment knob on the top of the weight, then turn the hardness tester to the desired angle and then tighten the azimuth adjustment knob.
(3) Loosen the bakelite star handle on the cross arm, and adjust the height of the cross arm with the left hand again to the hardness foot (Needle). When the bottom surface is about 10mm away from the round platform of the test stand, tighten the handle. Depress the handle of the test stand so that the presser foot (pin) is in full contact with the round table, and slowly turn the two fine-adjusting handwheels under the round table, straight Until the hardness tester shows 100 (±1).

Chongqing Leeb Instrument Co.,Ltd, the largest NDT instruments factory in the southwest of China, located at High-tech Industrial Development Zone of Chongqing, China. We specialize in manufacturing, researching and marketing of NDT Instruments, including various kinds of Hardness Tester, Thickness Gauge, Roughness Tester, Flaw Detector and etc. Factory with Quality System certified ISO 9001:2015. All products are CE, FCC certified.

In 2011, Leeb Ultrasonic Flaw Detector received the State Science and Technology Innovation Fund in China. We also got the Certificate of Utility Model Patent for the measuring platform in the same year. In 2018, we acquired Shanghai Fengbo Instruments Co.,Ltd and further expanded our production line of bench hardness tester. At present, we have developed agents and distributors in 47 countries around the world, main markets are in Asia, Europe and America.

With technical innovation, high quality products, competitive price and satisfactory service, Leeb aims to be the most valubale brand in NDT measuring field.

Workshop

Official License, Awards and Certicates