Leeb231 1250µm Metal Shell Coating Thickness Gauge For Eddy Current
Brand Name:LEEB
Certification:CE, FCC EAC & ISO
Model Number:Leeb231
Minimum Order Quantity:1 Set
Delivery Time:In 7-10 work days
Payment Terms:T/T, PayPal, Western Union, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Chongqing Chongqing China
Address:
High&New Technology Industrial Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Leeb231 1250µm Metal Shell Coating Thickness Gauge For Eddy Current
High Precision Changeable NFe Probe Metal Shell Coating Thickness Gauge For Eddy Current
Functions & Features
As the hot-sale item with Changeable NFe probes and back-light screen.
This equipment(Leeb231) has two softward for PC connection and data
analysis
User can switch off automatically or manually, and set the limit
according to the different request.
Technical Parameter
| Technical Parameters | ||||||||
| Model No. | Leeb231 | |||||||
| Measuring principle | NFe | |||||||
| Measuring range (µm) | 0~1250μm | |||||||
| Probe | Changeable | |||||||
| Shell | Metal | |||||||
| Accuracy | ±(1~3%H+1) μm; H refers to the thickness of testing piece | |||||||
| Minimum resolution (µm) | 0.1μm | |||||||
| Min curvature of the min area (mm) | Convex1.5 Concave9 | |||||||
| Diameter of the min area (mm) | Φ7 | |||||||
| Critical thickness of substrate (mm) | 0.5 | |||||||
| Memory | 300 groups measured data | |||||||
| Dimensions | 115*70*31mm | |||||||
| Power supply | AAA Alkaline battery | |||||||
| Standard Configuration | Main unit, 1 probe & substrate, 5 calibration specimens (48.5μm,99.8μm,249μm,513μm,1024μm) | |||||||
| Optional Accessories | Probes,Specimens | |||||||
Basic Calibration Correction
Basic calibration in the following cases, the change is necessary:
-The probe frayed at the top.
-Replace a new probe.
-Special purpose.
In measuring, if error is clearly beyond the scope, should be made
for the
properties of the probe to the calibration is called basic
calibration.
By entering the six calibration values (a thickness of zero and
five values), can realign the measuring head.
Steps of basic calibration;
Step 1: Under normal condition, continuous press “Clear” three
times;
Step 2: Press“Menu”and up & down key to
select“Calibrate”,press“Menu”to into the correct Zero;
Step 3: Place the probe vertically in the middle of the matrix and
hold still; after completion of shows such as 5 seconds away
again.To the next.
Step 4: When show the“S1”(The first specimens),put the minimum
value (48.5 μm)specimens on the standard substrate,probe vertically
on the S1 hold still,
such as display again after 5 seconds.Display real thickness“Real
thickness(0049.4μm)”,press“Menu”and up & down key to select to
enter the value
from“(0049.4 μm)”to the real one“(0048.5 μm)” and go to the next;
Step 5: Display“S2”,remove“S1”,put ( 99.8μm)piece on the standard
substrate,probe vertically on the S2 hold still, such as display
again after 5 seconds,display“real
thickness(0096.7μm)”,press“Menu”and up & down key to select to
enter the value from“(0096.7 μm)”to the real one“(0099.8um)”and go
to the next;
Step 6: Use“Step 5”to complete the real value calibration
of“S3(249μm),S4(513μm),S5(1024μm)”
Step 7: After calibrate S5will display“Loading...”,about 2 seconds
later it will come back to boot interface.Measured again after 5
seconds, such as standard substrate(Or you will enter the
continuous mode),correct Zero to ensure that the display value to 0
after the test piece (or measured values are not accurate). The
basic calibration complete.
Note:Specimens with other basic calibration, on the specimens of each
thickness should be at least 1.6 times the thickness of a
specimen.Such as:20,50, 100,250,500μm.
After the calibration, the instrument will work according to the
new calibration value.
High quality Equipment Box:
Leeb231 1250µm Metal Shell Coating Thickness Gauge For Eddy Current
Inquiry Cart
0