Whole Retreading Line of OTR Tire China Supplier
Brand Name:HHS
Certification:ASME CE, ASME CE
Model Number:HD-800-2600
Minimum Order Quantity:1 set
Delivery Time:20 working days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Qingdao Shandong China
Address:
Wangtai zone, Jiaonan District, Qingdao City, Shandong Province, China.
Supplier`s last login times:
within 15 hours
Product Details
Company Profile
Product Details
Truck Tire Retreading Whole Line Machines
1.Initial Inspection Machine
Weight:200 Kgs
Power:1.5Kw,380V,50Hz
Dimension: 1100x750x850 mm
Every single tire casing will receive a thorough inspection identifying potential defects.Using Melion multiple methods to inspect tires for defects and ensure only high quality casings to be retreaded.If repairs are needed, they are administered after inspection.
2.Buffing Machine
Standard Size: 15'',16'',20'',22.5''
Motor Power: 16Kw
Dimension:1600x1800x2100 mm
The tire’s old tread is mechanically removed on high speed
buffers.Buffers are extremely accurate and will remove the proper
amount of old rubber while turning the tire to an exact specified
diameter and radius.
3.Tread Building Machine
Dimension:1800*2100*2100mm
Wheel Chuck:15",16"-20",22.5"
In the Pre-cure Tire Retreading System, the tread rubber has already been vulcanized with the new tread pattern design. The bugged tire needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber(PTR) is then applied with building machine.
4.Envelope Spreader
Dimension:1600x1500x2200 mm
Operate the air cylinder and drive the Spreading Arms outwards to
spread the Envelope. Then open the Gripper and grip the bead, and
then lift the tire up with the cylinder-driven cable wire and
guiding pulley. Rotate the lifting arm and lower the tire into the
center of the Spreading Arms, and put it into the envelop.
Manipulate the Air Cylinder to retrieve the Spreading Arms and
release the Spreading Pads off the Envelop. Then lift the tire out
of the Spreader.
5.Monorail System
Dimension: 4000x1600x2100 mm
Description:
The monorail & hooks system increase productivity by reducing chances of casing contamination and allows for faster loading and unloading of tires.This increases your work place safety and productivity.
6.Curing Chamber
Dimension: 5500x2100x2350 mm
Heating Power:60 Kw
Tires are then placed in Curing Chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
7.Rubber Dust Collector
Motor Power:3KW
Weight:220kgs
Dimension:1600*780*2000mm
Collecting Rubber Crumbs which buffed off old tread by buffing machine.
8.Multifunctional Repair Stand
Power: 0.18 Kw
With advances in state-of-the-art repair materials and repair
methods, many of these tyres can be routinely repaired and in most
cases can be retreaded when the original tread is worn off. The
repair station is where any surface injury is treated using
effective material and tools for grinding and patching.
9.Rubber Extruder Machine
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to “fill” the injury. This would create a permanent repair that maximizes tyre life.
10.Cement Mixing Tank
Weight:90 Kgs
Motor Power: 1.5 Kw
Dimension: 800x800x1500 mm
Engineered with explosion-proof motor,Cement Mixing Tank stir industrial solvent and rubber materials evenly to guarantee the procedure of cement spraying.
Whole Retreading Line of OTR Tire China Supplier
Inquiry Cart
0