VICTOR 26 Multifunction Process Calibrator Signal Generator With Accuracy Of 0.01% 5 Digits Display 24V loop circuit IP65

VICTOR26 Multifunction Process Calibrator Signal Generator With Accuracy Of 0.01% 5 Digits Display 24V Loop Circuit IP 65 Protection Grade

• Basic feature

• A multifunctional on-spot process calibrator with high accuracy and high stability, which can provide powerful measurable functions, output and calibrates all parameters for all kinds of process.
• Basic feature of input measurement
• The max accuracy of measurement can reach 0.01%, and displays as 5 digits.
• Measurement functions include: DC voltage, DC current, resistance, RTD, TC, frequency, pulse counting, switch volume, pressure, and pressure leakage ect.
• Undertake two-wired, three-wired and four-wired resistance and RTD measurement.
• Switch test of fast response allows capturing the process parameters for switching actions.
• Data settle function: data-holding, zero, proportion, mean, Max/min value ect.
• Built-in 24V loop circuit and loop current measurement
• Basic feature of analog output
• Max accuracy of output can reach 0.01%, and output displays as 6 digits.
• Output functions include: DC voltage, DC current, analog resistance, RTD, TC, analog transmitter output, frequency, pulse counting, switch volume, and pressure output ect.
• Output augment and decrease setting, and can connect or disconnect output, which is easy for operation.

DCI output manual-step, auto-step and auto-ramping output functions.

Built-in 24V loop circuit.

• Two independent channels for measurement and input, allowing in-time measurement and outputs of process signals simultaneously; multiple data display to display input measurement value and output settings.
• Facilitate pressure calibration by external a series of VPM-S digital pressure module through serial RS-232 injection (LEMO plug). There are abundant varieties and range specification of pressure modules to meet any pressure measurement needs. And the basic accuracy can reach 0.05%, and a variety of pressure units are available for pressure calibration.
• Provide varieties of selectable temperature graduation. Built-in accurate temperature transmitter, with high accurate TC cold-compensation function, and RTD cold compensation can be selected both for connection or disconnection.
• PC on-line communication function

• The meter provides two ways to communicate with the user’s upper PC and can communicate by the infrared isolated serial commutation module of the compatible USB interface.
• Supports SCPI commands of industrial standard, and can realize remote control of the meter by equipment driving software.
• Note: the PC communication function is not available when the meter is communicating with the pressure module in HART communication function.
• The meter is equipped with data storage with large capacity, to store as many as 1000(groups) data of field calibration. The data can be read from the meter or uploaded to the user’s PC.
• The meter employs panel calibration technique, connects to standard device, undertakes panel calibration operation according to set range, and saves relevant calibrated data, fulfills the periodic calibration work stipulated by the meter to ensure the accuracy and performance.
• The meter employs the navigation key to make increment or decrement of the setting value, which makes operation convenient and easy.
• 3.2 inches TFT display screen, supporting multiple data display and intuitive interface.
• Other functions: auto power-off, VF, auto turn- off for backlight, setting of backlight, data and time display and setting, ambient temperature detection, power frequency setting ect.
• two ways of power supply
• The instrument can supply power through the four 5th alkaline batteries in the battery case, or use the adaptor to supply.

Simulation Output Function [adapt to one year after calibration 23℃±5℃, 20～70%RH ,accuracy=±(% settings + range %)]

VICTOR Instruments is a brand belongs to Xi'an Beicheng Electronics Co.Ltd. (former Victor Instruments ) which was established in 1980s,VICTOR specializes in producing test instruments and especially digital multimeters. Our products include analog and digital multimeters, clamp-meters, calibrators , megohmmeters, thermometers, tachometers, vibrometers, lux meters, function generators, frequency counters, oscilloscopes and other electronic testing and measuring equipment.

We also provide electronic test tools, measurement solutions, environmental products and ODM and OEM services to specific customers.

As before, our factory(Shenzhen VICTOR Hi-Tech Co.,Ltd.) is in Shenzhen city, To expand production demand,we moved to Xi'an city in 2013. And then we registered two new trademarks (YITENSEN and Ruoshui) in year 2017 for promotion of our VICTOR products to overseas market.

With over 30 years , VICTOR instruments has been focused on the full range of electrical testing and analyze instruments ,it is renowned as one of the largest manufacturers and suppliers of innovative, quality handheld test, measurement and inspection tools in the world.

Nowadays, we have agents and representatives in every city of China. Meanwhile, we successfully enter the overseas market in many countries. We strive to provide the best products and most considerate services to all customers.

Our Manufacturing Capability

VICTOR Instruments are designed and manufactured in our Xi'an Beicheng manufacturing center, a modern, automated, high-tech industrial park produces digital multimeter 10,000pcs/day , with pass rate 99.6%. With more than 300 skilled workers and 50 R&D staff ,our manufacturing center covers an area of more than 30,000 square meters , made up of : -8 dust-free workshops; -5 fully automatic production lines -12 sets of state-of-the-art production equipments.