

Add to Cart
Cartridge Filter Pulse Jet Dust Collector Union With Internal Fan
Pulse Jet Dust CollectorApplication
1. Pulse width setting: directly adjust to the required time. Tip:
In the working state, make this setting time smaller than the pulse
interval time.
2. Pulse interval setting: directly adjust to the required time.
3. Preset setting: Press the preset button to select the desired
number of channels.
4. Cascade function setting: it can only be set when the number of
working channels is displayed normally. After pressing this button,
there will be a decimal point on the unit digit of the digital
tube, which means that the pulse dust collector controller has
entered the main mode of cascade; when this button is pressed
again, it will appear on the digital tube. Both decimal points are
always on, which means that the pulse dust collector controller has
entered the cascade slave board mode; in the slave board mode,
pressing this button will exit the cascade mode.
5. Manual operation function: In the normal channel number display
state, after pressing this button, the controller enters the next
channel of cyclic work.
Techinal parameters
model | PPC32-3 | PPC32-4 | PPC32-5 | PPC32-6 | PPC64-4 | PPC64-5 | PPC64-6 | PPC64-7 | PPC64-8 | |
Handling air volume (m3/h) | 6900 | 8900 | 11160 | 13390 | 17800 | 22300 | 26700 | 31200 | 35700 | |
Filtration wind speed (m/min) | 1.2-2.0 (select different purification filter wind speeds according to different dust points) | |||||||||
Total filtration area (m2) | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | 496 | |
Net filtration area (m2) | 62 | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | |
Number of dust collectors (units) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 | |
Total number of filter bags (bars) (pcs) | 96 | 128 | 160 | 192 | 256 | 320 | 384 | 448 | 512 | |
Ash pressure Shrink air | Pressure (Pa) | (5-7)×105 | ||||||||
Air consumption (m3/min) | 0.27 | 0.37 | 0.46 | 0.55 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | |
Pulse valve | amount) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
Specifications (inches) | 1-1/2′′ | 2-1/2′′ | ||||||||
Poppet valve (with cylinder) | amount) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
Specification (mm) | Lifting valve plate diameter Φ460, cylinder diameter Φ63 | Lifting valve plate diameter Φ595, cylinder diameter Φ100 | ||||||||
Star unloading device YJD-16 | Feeding port 300×300, height 400mm, speed 41r/min, gear motor power 1.5kW, output 39.4m3/h | |||||||||
Screw conveyor | specification | no N/A | Diameter Φ300, output 30m3/h (filling rate Φ=0.7) | |||||||
Reducer | no N/A | Model XWD2.2-5-1/59, power 2.2kW | ||||||||
Filter bag specifications and materials | Diameter × length Φ130×2450, polyester needle felt weight 450g/m2, use temperature 120°C | |||||||||
Insulation area (m2) | 26.5 | 34 | 41 | 48.5 | 70 | 94 | 118 | 124 | 166 | |
Total weight of equipment (approximate value) (Kg) | 3110 | 4400 | 5700 | 7000 | 8940 | 10750 | 12570 | 14380 | 16200 |
Equipment advantages
▲Clean the dust more thoroughly
The off-line three (filtering, cleaning, static) cleaning method is
adopted to avoid the "re-adsorption" of cleaning.
▲More flexible design
According to the requirements of the working conditions, the
settling chamber can be designed to increase the life of the filter
bag, and the dust concentration can be as high as 1000g/Nm3.