1KW AC Servo Amplifier Three Phase Programmable For Robotics
Brand Name:Vector
Certification:CE
Model Number:VEC-VC-00623H-M-E
Minimum Order Quantity:1 kit
Delivery Time:3-5 work days
Payment Terms:T/T, Western Union, L/C
Contact Now
Add to Cart
Active Member
Location:
Shenzhen China
Address:
Building 13, Maker Town, Liuxian Avenue, Nanshan District, Shenzhen
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
220V 1KW Three Phase Programmable Ac Servo Amplifier For Robotics
Products Description
| Product Name | Ac Servo Amplifier |
| Brand | Vector |
| Model No. | VEC-VC-00623H-M-E |
| Power4 | 1KW |
| Voltage | 220V |
| Phase | Single/Three Phase |
| Rated Current | 6A |
| Communication Protocols | Modbus/CANopen/EtherCAT |
| Encoder | 17/23 bit absolute encoder |
How is the Servo Drive works? The Location control model, Speed control model and Trogue control model.
| Voltage | Control Mode | Single-phase / three-phase full-controlled rectification SVPWM modulation |
| Encoder | Encoder Feedback | 17/23 bit absolute encoder; |
| Pulse Command Input | Pulse Type | Differential input,Open collector |
| Frequency Range | Differential input:0-500kHz,pulse width greater than 1us Open collector: 0-300kHz,pulse width greater than 2.5us | |
| Pulse Mode | pulse + direction; AB pluses; CW+CCW; | |
| Analog Input | Voltage Range | -10V to 10V |
| Input Impedance | 10kΩ | |
| Maximum Frequency | 1.5kHz | |
| DI/DO Interface Type | NPN/PNP | |
| Communication | Modbus/CANopen/EtherCAT | |
Servo Drive Description- Details about a Servo Drive, how to select the Servo drive model and do installation?
| Key Name | Key function |
| Mode | mode switch, return to the previous menu |
| ▲(add) | increase flashing bit value of the LED digital tube |
| ▼(dec) | Decrease flashing digit value of the LED digital tube |
| ◄◄(shift) | Moves the blinking LED tube to the left; checks the high value of
data longer than 5 bits; Fault reset;execute Fn function |
| SET | read/write parameter values |
Maintenance and inspection Precautions
● do not change the wiring while the power is on, otherwise it may cause electric shock or injury.
● please perform wiring or inspection by professional technicians, otherwise it
may cause electric shock or product failure.
● please check the power after the power is off for at least 5 minutes. Even if the power is turned off, high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5 minutes after the power is turned off, otherwise it may cause electric shock.
●when replacing the servo drive, please back up the servo driver user parameters to be replaced before the replacement, and transfer the backup to the new servo drive, and then restart the operation, otherwise the machine may be damaged.
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of
the variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Quantity | 1-5 kits | 50-100 kits | 200-500 kits |
| Delivery time | Within 3 days | 5-10 days | 15-25 days |
| Packing details of Servo Drive | |||||
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) | C015(32-38A) | C022(45-60A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 | 440*296*288 | 510*305*325 |
Our Factory
1KW AC Servo Amplifier Three Phase Programmable For Robotics
Inquiry Cart
0