Ratio Error Substation Test Equipment , Electronic CT PT Test Equipment

Brand Name:HNMC
Model Number:HEWD-2A
Minimum Order Quantity:1
Delivery Time:30-45 days
Payment Terms:L/C, T/T, Western Union
Place of Origin:China
Contact Now

Add to Cart

Active Member
Location: Zhengzhou Henan China
Address: No.1207-1, Building #1, the National University Sci-Tech Park of Henan Province, No.11 Changchun Road, Zhengzhou, Henan 450000
Supplier`s last login times: within 38 hours
Product Details Company Profile
Product Details

Electronic (Digital) CT &PT Calibrator HEWD-2A


Technical Parameters


Primary rated voltage measureup to 500KV
Primary rated current measure5-5000A, customization available
Standard signal input
Voltage input0-120%Un, Un=100V,100/√3V. Customization available
Current input0-120%In, In=1A or 5A. Customization available
Analog input signal0-10V (peak value)
Small signal (sine wave) output0-4V (RMS value)
Accuracy class
Ratio error<0.05% (1-120% rated value)
Phase error<2´(1-120% rated value)
Absolute delay<1µS (waveform distortion less than 1%)
Delay jitter<0.5µS
ST optical fiber interface (one group)
Optical fiber Transmitting Power>-6dBm
Optical Receiving sensitivity-38dBm
Sync signal
Optical PPS sync input & output4Nos
Optical IRIG-B(DC) sync input & output4Nos
Sync output time accuracybetter than 100ns
Input supplyAC220V±10%, 50/60HZ, power consumption less than 20W
Working conditiontemperature 0℃~+55℃/Humidity ≤90%
Size & Weight360*400*160mm/7.5kgs

Main Features


1. Digital output error test of electronic (digital) CT/PT

1) Ratio and phase error test

2) Compatible with the protocol IEC61850-9-1,IEC61850-9-2,IEC61850-9-2LE and IEC60044-FT3

3) Compatible with various optical fiber interfaces

4) Holography analysis of message of IEC61850-9-1/IEC61850-9-2

5) Recording error data of test point and data inquiry/store/print by software

2. Analog output error test of electronic (digital) CT/PT and conventional CT/PT

1) Ratio and phase error test of digital CT/PT

2) Ratio and phase error test of conventional CT/PT by converting into voltage signal through

standard converter

3. Up to test 0.2S class digital CT/PT

4. Analog of small signal output

5. Harmonic wave analysis of input signal of digital CT/PT under test, generation of spectrum curve,

record of content of each time harmonic (up to 50times harmonic), and calculation of harmonic distortion.

6. RMS value parameters analysis (amplitude, phase, frequency and etc) of input standard signal

7. Real-time displaying output waveform, standard signal waveform, polarity, sync status and percentage

value under test point of CT/PT under test

8. Polarity and time-delay test of digital CT/PT by using inbuilt PPS (pulse per second) and B code

to output sync signal

9. Operation by tablet through APP software (optional)

10. EMC compliance with standard IEC60044-8

11. PC software

1) Friendly HMI and clear interfaces

2) Automatically save test data and generate test report




China Ratio Error Substation Test Equipment , Electronic CT PT Test Equipment supplier

Ratio Error Substation Test Equipment , Electronic CT PT Test Equipment

Inquiry Cart 0