

Add to Cart
Factory deep cycle gel battery 12v 200ah AGM Lead Acid Battery for wind and Solar system
>Main Features
1.What is an AGM Battery?
AGM Technology Explained AGM batteries are based on the standard SLA (sealed lead-acid) battery construction. The difference lies in the addition of an ultra-thin glass mat (or AGM separator) that "absorbs" the electrolyte and makes the battery non-spillable. A sealed lead-acid battery is also known as a VRLA battery.
2.AGM Battery vs. Other Batteries
Although AGM, gel, and flooded batteries are classified as
lead-acid batteries, AGM batteries stand out in the internal
construction of the battery. AGM batteries are easy to install,
with zero maintenance and gas formation.free maintenance and
spill-proof design make an AGM battery extremely suitable as a
solar battery.The construction of an AGM battery is suitable for
systems that require high currents (such as starting an engine).
Furthermore, AGM battery poles can be unscrewed for the battery to
be combined with any other standard battery terminal.
A battery type differs in price and lifespan. For example, an AGM
battery is believed to last around 600 cycles, but a lithium
battery may last 7,000 cycles. In addition, AGM batteries are
expensive than flooded batteries and cheaper than gel batteries.
3.AGM battery vs. Gel battery
Both AGM and gel batteries are categorized as VRLA batteries that
are known for easy maintenance. Unlike an AGM battery, a gel cell
battery uses a special type of silica gel to hold the electrolytes
together and facilitate the free movement of electrons from the
plates.
Gel batteries lose power faster at lower temperatures, but AGM
batteries work well even in extreme weather conditions.
Moreover, a deep cycle gel battery has other disadvantages, such as
a shorter lifespan and slower charging time than a deep cycle AGM
battery.
4.AGM battery vs. Lead-acid battery
How is an AGM battery different from a typical lead-acid battery?
Unlike conventional lead-acid batteries, AGM batteries provide
better cycling performance and faster charging performance.
AGM batteries demonstrate minimal gassing and acid leakage, last
longer and are resistant to freezing. Furthermore, the spill-proof
and leak-proof design makes it easier to mount an AGM battery in
any direction.
Battery Model No. | FBR12V200Ah | |
Nominal Voltage | 12V | |
Capacity | 20HR(5.25V) | 200Ah |
(25ºC) | 10HR(5.25V) | 176Ah |
1HR(4.80V) | 124Ah | |
Dimension | Length | 522±2mm |
Width | 238±2mm | |
Height | 218±2mm | |
Total height | 221±2mm | |
Approx. Weight | 59.5kg±4% | |
Terminal type | F13 | |
Internal resistance (Fully charged,25ºC) | Approx 3.5mΩ | |
Capacity affected by | 40ºC | 102% |
temperature(20HR) | 25ºC | 100% |
0ºC | 85% | |
-15ºC | 65% | |
Self-discharge | 3month | Remaining Capacity:91% |
(25ºC) | 6month | Remaining Capacity:82% |
12month | Remaining Capacity:65% | |
Nominal operating temperature | 25ºC±3ºC(77ºF±5ºF) | |
Operating | Discharge | -15ºC-50ºC(5ºF-122ºF) |
temperature range | Charge | -10ºC-50ºC(14ºF-122ºF) |
Storage | -20ºC-50ºC(-4ºF-122ºF) | |
Float charging voltage | 13.5 to 13.8V | |
(25ºC) | Temperature compensation:-18mV/ºC | |
Cyclic charging voltage | 14.5 to 15V | |
(25ºC) | Temperature compensation:-30mV/ºC | |
Max charging current | 60A | |
Max discharging current | 1600A(5sec.) | |
Designed floating life(20ºC) | 10years |
Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
Raw material | Lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
It is widely used in communication equipment, UPS/EPS power supply, medical equipment, emergency lamp,
aviation signal, railway signal,alarm and safety system, instrument and instrument system.
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.6V | 436 | 336 | 201 | 124 | 73.1 | 52 | 42 | 35.9 | 24.7 | 20.4 | 10.8 |
9.9V | 423 | 328 | 197 | 122 | 72.6 | 51.7 | 41.8 | 35.7 | 24.5 | 20.3 | 10.8 |
10.2V | 405 | 316 | 191 | 119 | 72 | 51.4 | 41.5 | 35.4 | 24.4 | 20.3 | 10.7 |
10.5V | 388 | 305 | 186 | 116 | 70.9 | 51 | 41.2 | 35.2 | 24.2 | 20.1 | 10.7 |
10.8V | 366 | 289 | 179 | 113 | 69.1 | 49.5 | 41 | 34.1 | 23.5 | 20 | 10.6 |
>Constant Power Discharge Characteristics(Watt,25ºC)
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.60V | 4709 | 3689 | 2255 | 1409 | 846 | 612 | 494 | 424 | 293 | 243 | 129 |
9.90V | 4568 | 3601 | 2210 | 1388 | 841 | 608 | 491 | 422 | 292 | 243 | 129 |
10.2V | 4379 | 2468 | 2142 | 1353 | 834 | 604 | 488 | 419 | 290 | 242 | 129 |
10.5V | 4191 | 3350 | 2091 | 1324 | 821 | 600 | 485 | 416 | 287 | 240 | 128 |
10.8V | 3955 | 3173 | 2014 | 1284 | 800 | 582 | 470 | 404 | 279 | 239 | 127 |