Firestone W01-R58-4078 Suspension Air Spring Installation Diameter 190MM Air Shocks
Brand Name:AIRSUSTECH
Certification:ISO/TS16949:2009
Model Number:1B6×1P
Minimum Order Quantity:5
Delivery Time:5-8 Working Days
Payment Terms:T/T, Western Union, Paypal or Others
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Firestone W01-R58-4078 Suspension Air Spring Installation Diameter 190MM Air Shocks
Product Specifications
| Gas Fitting | G 1/2 | Bottom Cover Plate Diameter | 152.5 mm |
| Operation | Gas-filled | Minimum Height | 55 mm |
| Screw Type | 4 pcs×M8 | Maximum Height | 110 mm |
| Distance Air Hole Betweeen Screw Hole | 63.5 mm | Recommed Height | 90 mm |
| Screw Center Distance | 127 mm | Installation Diameter | 190 mm |
| Screw Width | 9 mm | Bellow MAX. Diameter | 175 mm |
| Top Cover Plate Diameter | 152.5 mm | Pressure Ability | 0-8 bar |
Product Technical Parameters
| Pressure [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [I] |
| Force (Load) [kN] | 3.1 | 4.2 | 5.3 | 6.4 | 7.5 | 8.7 | 0.87 |
| Spring Rate [N/mm] | 158.5 | 200.5 | 245.5 | 286 | 331.5 | 374.5 | |
| Natural frequency [Hz] | 3.5 | 3.4 | 3.4 | 3.3 | 3.3 | 3.3 |
| Pressure | [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [I] |
| Height H [mm] | 100 | 2.27 | 3.12 | 3.99 | 4.89 | 5.82 | 6.79 | 0.97 |
| 90 | 3.05 | 4.15 | 5.25 | 6.35 | 7.51 | 8.72 | 0.87 | |
| 80 | 3.81 | 5.11 | 6.42 | 7.76 | 9.13 | 10.5 | 0.75 | |
| 70 | 4.54 | 6.03 | 7.55 | 9.08 | 10.7 | 12.3 | 0.6 | |
| 60 | 5.34 | 7.06 | 8.82 | 10.6 | 12.4 | 14.2 | 0.43 |
Cross References:
Firestone
W01-R58-4078, W01R584078, W01 R58 4078, WO1-R58-4078, WO1R584078, WO1 R58 4078
Contitech
FS 76-7 DI, FS 76 7 DI, FS767DI, FS76-7 DI, FS767 DI, FS 76 7FDI, FS76-7DI,FS 7-67DI
Dunlop Pneuride
6" x 1
Dunlop Springride
SP2913 SP 2913
Norgren
PM/31061
Parker
9109004A
Important Tips to Remember When Installing A New Unit
1.Check levelling valve, linkage and transmission parts for wear
and damage and if necessary replace the damaged parts.
2.Check that the shock absorber for leakages and take a shock
absorber test. A defective shock absorber must be replaced.
3.Once the air lines are disconnected, check their entire length
for cracks or other damage. Replace worn parts.
4.With the air spring removed, other parts of the air suspension
become more accessible. Check for wear or damage of the frame
hangers, trailing arm bushings, torque rods, the trailing arms and
the air spring mounts. When it is necessary, also replace parts.
5.Check bearing for air spring bellow for external damage,
deformation, sharp edges and correct fastening.
6.Before installing the new unit, clean the air spring mounting
plates to ensure proper attachment to the suspension.
7.Always use new attaching bolts for the installation and observe
the tightening torques. Never use old bolts, because these can fall
out.
8.Check the linkage of the levelling valve to see that it is
functioning properly. Under load, the linkage should move from the
neutral position up to the intake position. This lets air into the
springs, which brings the arm back to the neutral position. This
lets air into the springs, which brings the arm back to the neutral
position. That opens the exhaust valve, allowing air to escape
until the arm returns to the neutral position. Then check the
driving level.
The Real Pictures of 1B6×1P:
Firestone W01-R58-4078 Suspension Air Spring Installation Diameter 190MM Air Shocks
Inquiry Cart
0