Triple Rubber Bag Air Jack Fast Lift Action Capacity 3000KG 3T Max.Height 40/48cm For Minivans

Extremely Fast Lift Action Capacity 3000KG 3T Max.Height 40/48cm Triple Rubber Bag Air Jack For Minivans

Specifications and Detailed Technical Parameters

Operable Handle

This airbag jack has a long handle, making the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk.

Matters needing attention

1. This lifting jack is only used in the procoss of rising and falling and if to support the cart, please use the safety stands. This product can inly be used for the skirt part of the car.
2 Please used in the relatively level, solid ground.
3 Please piace a triagle block under the car dependency wheel.
4. The normal operating pressure is in the rage of 5-10kg/cm3
5. Compressed air should be clean and contain no water.
6. There is no need to raise the ballon to the miximum, as long a to the desired height (such as to cram off the ground), that is to say, to close the ball value switch, to stop gas supply, to cran the safety brachet, and then to work.

Appliactions

Pneumatic jacks are ideal for heavy lifting in auto workshops, repair shops, home warehouses, for family cars, minivans, SUVs, SUVs, and more.

Installation Instructions

1. The tracheal passes through the cornecting rod 1, and rod 1 is fixed on a bottom plate with four nut bolts.
2 Firstly pass the tracheal tube through the connecting rod 2, and sheath the pneumatic connector nut in tracheal tube into the pneumatic lay-up of the controls, and tighten the muts(do not use excessive force) , finally, connect the spindles with bolts.

Features of Airbag Pneumatic Jack

1) Easy and labor-saving: due to the pneumatic lifting, no manpower is required, it is easy and convenient:
2) Lifting and descending is extremely fast and stable. Generally, it only takes about 3 seconds for a car to rise. The advantage of the ultra-low chassis is highlighted and does not hurt the chassis: because the contact part with the car body is imported soft rubber, the bottom of the car can be increased at the top without hurting the chassis.
3) High cost performance: Due to the long service life, although the price is relatively high, it still has a high cost performance.
4) Sturdy and durable: Because it is a purely pneumatic product, it does not contain hydraulic oil, there is no oil leakage, and there is no need to replace the sealing ring, and because the airbag itself is a rubber product, the port is like a sealing ring, and the gas seal is very easy to complete
5) Improve the image of the store: due to the use of this product, it is conducive to attracting customers, and the performance is also excellent.
6) Low temperature use: Due to the use of high-performance airbags, the performance is also excellent under the condition of -40 degrees. Wide range of use: because it is in flat contact with the ground, it can be used as usual in sandy and snowy fields, and there is no phenomenon that it cannot be supported due to subsidence.

Product Picture

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd.

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.