

Add to Cart
AIRSUSTECH G3001 Rubber Air Spring Replaces 1M1A-0 Firestone Style W02-358-3001 Airstroke Actuator
Cross Reference
Firestone Style 1M1A-0; 1M1A-O
Air spring supplier/competitor: Firestone
Supplier//competitor: W01-358-3001; W01 358 3001; W013583001;
WO1-358-3001; WO1 358 3001; WO13583001
Blind nut, 1/8 NPT, plastic stud: WO2-358-3000
Blind nut, 1/8 NPT, brass stud: W02-358-3001
Blind nut, 1/8 NPT, brass stud, stainless steel ring: W02-358-3005
Air spring supplier/competitor: Goodyear
Supplier//competitor: 1S3-013; 1S3 013; 1S3013
PISTONumber: ASC-06-7-017; ASC 06 7 017; ASC067017
Air spring supplier/competitor: PREVOST
Supplier//competitor: 950208
Air spring supplier/competitor: Contitech/ Continental
Supplier//competitor: SK 37-6 P02; SK 37 6 P02; SK376P02;74105
Specifications and Technical Parameters: G3001
The thread on top plate: 5/8-11UNC
The thread on bottom plate: 5/16-18UNC
Bottom plate diameter: 74.5mm
Air inlet: 1/8''-27NPTF
Min. Height: 38mm
Max. Height: 91mm
Brass stud
Net weight: 0.25kg
Metric Firestone 1M1A-0 air spring replacement we could offer
Description | Assembly No. |
Blind nuts, 1/8 BSP, Plastic stud | W02-M58-3000; W02 M58 3000; W02 M58 3000; WO2-M58-3000; WO2 M58 3000; WO2 M58 3000 |
Blind nuts, 1/8 BSP, Brass stud | W02-M58-3001; W02 M58 3001; W02M583001; WO2-M58-3001; WO2 M58 3001; WO2M583001 |
Air spring advantages
FRICTION FREE FOR IMMEDIATE RESPONSE
Since air actuators have no sliding seals, there is no breakaway
friction as with conventional cylinders
FLEXIBLE MEDIA
An air actuator can do its work with either a liquid or gas
ANGULAR CAPABILITY
An air actuatorpossesses the unique capability of stroking through
an arc without a clevis. Angular motion of up to 30 degrees is
possible, along with the design advantage of generally less complex
linkages.
SIDE LOADING CAPABILITY
Air actuators, within certain limits, are not affected by side
loads as are conventional cylinders. This misalignment capability
eliminates
potential rod bending, scoring, and excessive seal wear common to
conventional cylinders.
COMPACT STARTING HEIGHT
Air actuators have a low profile compared to conventional
cylinders. Our smallest air actuator (2.2 inch/dia.) collapses to
just 1.1 inches in height, while our largest triple convoluted air
spring(37 inch/dia.) will collapse to a very compact 5.5 inches.
FACTORY SEALED AND TESTED
Most air actuators feature proven concept of crimped end plates.
The crimped design allows for preshipment testing and quicker
installation on equipment.
The picture of AIRSUSTECH G3001 Air Bag / air spring / air balloon/
air shocks/ air spring assembly